Hi,
Thanks for the post.
I have been researching away at the problem for some time now - and the problem seems to be that the win2k server running is an upgraded winnt 4 server - cloned onto this hardware..
That mess = a reinstall :-(
/Henrik
Hi,
I actually also thought about that I am running through a KVM. I did the change - but that had absolutely no effect.
I'm getting desperate as I may be facing a complete reinstall (pdc, ad, iis, ftp, exch and then some) of the machine and software - and with the amount of stuff installed...
Hi Stiddy,
Thats odd, I'm glad that you get the proper resolutions.. I'm also running on the dsame drivers & versions...
If you still can check your working system can you tell me what you get in the Adaptor Information box on the adaptor pane/tab on the desktop settings.. ??
I'm Getting...
Hi All,
Got a Netfinity 5500 M20 (8662-51Y) with;
4x P3-Xeon @ 550
2GB Ram
Intel Pro/100+ Dual Server Adaptor
ServeRaid 3 (6.10.24) 6 disks..
OS: Win2000 Server sp4
I'm having problems locating a Suitable driver for the built-in SVGA card (S3 TrioV64+). The driver installed by Win2k install...
I actually did start a new thread - but got no answers...
So to short the process I'm asking ppl who seem tho be working with the same hardware as I'm having trouble with.
/Henrik
Hi,
Thanks for the suggestion.
I've allready tried uninstalling the device (there are no arrers), automatically selecting the driver and manually selecting the driver. The end result is the same, I only have two low-res options - both in 16 colours... It's very strange as afaik. the cars...
Hello,
You can do this with Symantech GHOST >= v7.5 Enterprise - if the raid5 you want to copy is a hw raid and the volume is NOT a dynamic volume...
/Henrik
Hi All,
Problem solved - I needed to upgrade my BENT (OFO + Remote Agent + Backup Software) to the latest v8.5.something..
Now I dont get errors anymore...
/Henrik
Hello,
I'm sorry but the answer is no .- IBM is expecting you to download the ServeRaid 6.10 CD which will allow you to configure the controller.
Theres no manual method.
Depending on your controllers revision there may be a smaller download (disk) on the IBM site..
Maybe you should get...
You would want to fail the drives presented by the raid-controller (in ServeRaid thats F5 at the error/boot message)
Even if you bought same physical (in make, model and geometry) disks the raid will fail to use them as replacement for the old drives as they (the old drives) are all missing and...
Hi All,
Got a Netfinity 5500 M20 (8662-51Y) with;
4x P3-Xeon @ 550
2GB Ram
Intel Pro/100+ Dual Server Adaptor
ServeRaid 3 (6.10.24) 6 disks..
OS: Win2000 Server sp4
I'm having problems locating a Suiftable driver for the built-in SVGA card (S3 TrioV64+). The driver installed by Win2k install...
Hi All,
Got a Netfinity 5500 M20 (8662-51Y) with;
4x P3-Xeon @ 550
2GB Ram
Intel Pro/100+ Dual Server Adaptor
ServeRaid 3 (6.10.24);
with 6 disks ()
set up as
unit 1+2 = raid 1 / Boot
unit 3-6 = raid 5 / Data Drive
OS: Win2000 Server sp4 (runs PDC + GC, AD, IIS, EXCH)
System...
Hi All,
Got a Netfinity 5500 M20 (8662-51Y) with;
4x P3-Xeon @ 550
2GB Ram
Intel Pro/100+ Dual Server Adaptor
ServeRaid 3 (6.10.24) with
with 6 disks ()
set up as
unit 1+2 = raid 1 / Boot
unit 3-6 = raid 5 / Data Drive
OS: Win2000 Server sp4 (runs PDC + GC, AD, IIS, EXCH)
System...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.