Search results for query: *

The port was deleted via NET USE /delete I still need help. I installed an EPSON 590 via a Centronics / RS232 cable to a PC. Everything prints fine from this PC. I set the printer to sharing, I did an ADD PRINTER on all the other PCs (XP). The EPSON has an LPT1 port assigned. The printer shows...

I'll try that as soon as I can. I am in MD and the site where the port needs deleted is in PA. Thanks Doug

Thanks, but That procedure is exactly what I have attempted to use numerous times. When I hit delete, I get an error THIS OPERATION CANNOT BE PERFORMED. I cannot delete the port!! Doug

I HAVE CONFIGURED A PORT (SHOULDN'T HAVE) WHEN INSTALLING AN HP PRINTER. THE PORT GOT CONFIGURED WITH THE SAME ADDRESS AS THE HP. I CANNOT DELETE THE PORT. I GET SOMETHING LIKE "THIS OPERATION CANNOT BE PERFORMED". AS ADMINISTRATOR IT LOOK LIKE I HAVE ALL THE BLOCKS CHECKED TO MANAGE THE...

Thanks, We used DOS procomm years ago, but nothing remains. John, could you please clarify "you can't make changes". Are you talking ADDS, MOVES etc.? Doug

The WYSE console (CRT) has gone bad. I have been able to connect to a laptop via numerous gender menders and use hyperterminal to a very limited extent. All I get displayed on the laptop is what has been buffered for the WYSE. What am I missing to get the ack/nak operational? The enter key is...

Our WEB hosting has expanded and we need to move to a bundled T1 setup. Mgmt wants to bundle 4 T1s. OK, that means 4 DSUs/CSUs. The question is, what do these connect to to combine the 4 T1s into one data circuit? Doug

We have installed a DSL (in bridge mode). The server is addressed with a public IP via the PAT. The server is accesiable from the WAN side, no problem. The PC's can browse the world. The server can be reached from the PC via the private address. The server cannot be reached from the private...

Yes, I know to check the website, at the time I was looking at Executone because of the chassis lables and archives. Tt is Valcom unit. The TOA paging amp (120 watts) is on a different floor than the Valcom. Thanks for the help Doug Dept Strategic Systems Center for Strategic Leadership

We have a TOA A912A AMP & Valcom V1109RTVA page adapter supporting 6 paging zones (per documentation). Dial selections 1 thru 9 are configured. Zero does not respond. The basement is wired and is one the dial selections. Yes, I would like to add the basement to the 9 selection, or use zero. Our...

I have a executone PA system, model unknown. It has been used but unmodified / untouched for 10 years. We dial 118 from our phone to get to the PA system. then dial 1 thru 9 depending on the floor we want to address. Example: Dial 118 then, 1 for the 1st floor etc. 2 for the second floor, 6 for...

The campus has a 3.0/512 DSL; I believe the router to be a Zyxel. This supports 4 buildings on the campus. All address are provided via DHCP. I want buiding 1 thru 3 to continue to be DHCPd from the phone-co provide DSL equipment. I need to build a network in building 4. Therefore I need 150...

The application is WAVE. Doug Dept Strategic Systems Center for Strategic Leadership

I realize the importance of a product name; but I don't think providing it is a good idea at this point. It is a great piece of software; at this time all we are interested in is using it as an automated speed dialer. The install is fairly quick and easy; no prompts for any "telephone" type of...

An addition to above. The 3rd party software rings all phones 6 times. The Nortel 2616 phones when answered on one of the first rings will disconnect after the time it takes to completed the 6-ring cycle. During this time the phone is inop (talk/listen). Doug Dept Strategic Systems Center for...

We have connected CISCO CM and out Nortel 11C with T1 CAS. Point to point calls and ad-hoc calling is working fine betwenn the systems. We installed 3rd party software to do "blast out" conference calling. This permits conference calls to be initiated from a 7960 quick dial key for 12 or so...

I did an LD87, configed TSC & FLEN 4. Same error. ERR624. Also did LD87 with LSC. ERR624 again.

MY LD 87 has a 6 for the DSC. (no other entries) The RLI is 0 RLI 0 in LD 86 as expected, shows rout 10 which has been configured. Any other pointers will be appreciated.

Are you asking why we didn't go with the MRP300? We have a number of empty slots in the ICS. We only need one port on the 6608, but is nice to have a spare; plus we lose a slot in the 6509 A year and a half after an intergrator / vendor proposed this I just don't recall the justification. If...

Are you asking why we didn't go with the MRP300? We have a number of empty slots in the ICS. We only need one slot on the 6608, but is nice to have a spare. A year and a half after an intergrator / vendor proposed this I just don't recall the justification. If this is not what you are refering...