I try to setup the h323 link between avaya ip office and trixbox.
I modified the ooh323.conf file. Now I can call any extension in
trixbox from avaya. But when I call trixbox extension from avaya the calls get disconnected on answer.
any help
hello,
I am new to asterisk freepbx. I manage to setup with sip extensions and they work. now I am try to link this with avaya ip office.I have tried most of the setting in this forum and website but no luck at all. Can someone help me. I am running the very lates freepbx model 2.9
Guys,
I managed to link IPO with Call manager by setting up a inter-cluster trunk (non-gatekeeper controlled) in Call manager. Now I can rings the handset in both end but no audio from any site
Guys,
I have tested the VOIP link between two IPO they they work fine.I think it is all in the call manager configuration which I am not familiar. Have any one got it working IPO and CCM via ip trunk.
Tom,
Yes it is trying to dial via the IP line which I can see from system satus and the system monitor.When I run a wireshark to capture the packets it show it only try to setup with CCM but ackowlodgement never received from CCM
Guys,
I still can't get CCM and IPO integrated via h323 trunk. I even tried both system at same subnet still no luck. When I try to make a call to cisco phone from IPO all its say "incompatable disc"
Hi tlpeter,
I have got shortcode to route calls via IP line. And all the settings in the IPO is OK since I know more about IPO than the call manager. I think I may have to carry out more settings in call manager which I am not familiar.If the CCM use 7200VXR as gateway do I need to consider...
Tom Mills,
Thanks for your quick response. But still I can't make it work.When I try to test a call from IPO in doesn't go via IP line and the and I am getting incompatibale message in IP phones
Hello,
Has any one got any information how to configure avaya ip office 406v2(4.1) with cisco call manager 3.3. Currently I got two sites are connected via WLAN and each site got their own pabx. 1-site with ip office and the other with call manager.
Hi,
I got an issue with IP office 406 and voicemailpro between main office and remote site.When someone select an option to transfer a call to remote site via IVR the called party don't get ring tone even though the its rings in remote location.
The main site is ip406v2 with 4.1 (9)...
Hi,
The option 1 goes to agent group and the option 2 go to hunt group.
eg maibox 1 agentgroup 1201 type extension only
maibox 2 hunt group 1601 type extension only
currently if i press any one of the option it say you are being transfered to ... 1/or 2 afetr few seconds its bounce back to...
Hi,
I have problem with My auto-attendant set-up, When I dial the auto attendant number I get the right announcement played. But when I chose any one of the two options from the menu the calls do not transfered to the right extension instaed of that I get message says "that mailbox is not exit"...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.