Search results for query: *

Thanks Paterson i will try that when im back on site thanks again

Does anyone know how to activate the relay that is on the analogue main board? i cannot find any reference to "relay" anywhere. thanks

Hi all. I cannot for the life of me see how to attach the wallmount bracket onto the CX controller. has anyone done this. Thanks

I will try that next time im on site thanks for all you help

i think because its only 6 digits the system is still waiting for a timer to expire! i tried 777888; with no luck

I have found that you cannot do the following: locate all free dn "0" to "any number" always find starting from 0 does not work

I have a shortcode of: 777XXX 777888 0 Dial it works fine but i would like to speed it up as it takes a long time before 777888 it is sent to line. Any ideas

If you are working on a 3300ICP then yes but if you are on an SX2000 then an external RAD is also required.

If its a 3300 then send the call to a huntgroup and have the console as a member. You can now assign 2 RAD greetings to the huntgroup. dont forget to check out the COS to setup the timers etc.

Thanks Lundah.

thanks guys

Can i run a maintenance command to give me a list of all DNs in use.The reason i ask is i have a site with hundreds of users but the numbers are all over the place.I need to add them all to the remote BLF form.It will take me ages to go through all the multiline set forms etc to get a list of...

I have two questions regarding 3300 DHCP. Q1. Can i play around with these settings on a live system without fear.I assume these settings only matter to the phones on boot up.So i could disable the dhcp without the customer knowing make changes and turn back on. Q2. I have a 10.100.1.0/16...

cheers mitelman

i can use this command to print out the telephone directory on an sx2000: fo tel dir /port lpr3 what is the form name so i can print out a list of all the plid numbers and what extension number is assigned. Thanks

Thankyou very much for the reply. you have given me just what i needed. Thanks again.

On the SX2000 how many attempts do you get to login before it locks you out? Is this the same for the 3300? are they case sensitive? thanks

tried both perhaps this is how it should look.

V6.0.5.7 is the minimum requirement cheers

i have connected a plasma screen to a pc running the LAN wallboard. how can you improve the display as it is only showing a small black box.Also the desktop remains the same with the icons wallpaper etc. Thanks