Search results for query: *

works without a problem with r14. Only if you se CM4 and want to bulkload anything ... don't used dadmin as it uses the f**cking pin code ... and that's not supported with the utilcall tool. But it's a very nice tool!! :-)

yes that's it! Glad I could help. This has something to do with call forwarding which is not following your correct ARS path. With this you're not using ARS and then it all works. Some kind of design error for me! ;-)

ok, now your call forwarding destination is for example: 0 0032 1234567 (international format) You need to change this by using a trunk access code. This can be found if you do a "List Trunk" there you can view all available trunk access codes. Your call forwarding destination will look like...

cmcshane, Try to forward the station with a TAC. So instead of the normal nr put in front a TAC.

Does anyone have some links to pics and stuff where cisco is made ridiculous VS Avaya? I need that stuff asap! :-) Example: http://avayaip.googlepages.com/ciscophones Thanks alot! (need it for some cisco guys)

You need "coverage-after-forwarding" to be set to YES --> change system-parameters coverage-forwarding. If not set, then you call will not be covered after the forwarding to the x-ported station.

CM4 is a bit different in user administration. You need indeed to create the dadmin user by yourself. So it is not automated with the authentication file. You have to add dadmin in the "susers" group and also in an additional "prof2" group. Afterwards if an account is locked out you can unlock...

Supervisor client rel. 13 is not updated for server release 14. But you can download it at http://support.avaya.com for free. And rel 14 of supervisor client supports rel. 13 and 12 server releases! So upgrade to rel. 14 is the thing you need to do! ;-)

a 9650 with an expansion module is the solution for CC's. Then you all the space to play around! ;-)

list registered ..." will you a list of registered phones. And you have an identifier which will tell you what are the soft phones. So you can view them over there.

Were you able to import some stations? As I have the same problem overhere. I allready found an update on the support pages (3.1.13u2.0) which is meant to solve this error. But I still receive the same error! I can't get it out of the import!!! Any ideas? How do you guys import in bulk 1000...

Ok, this should get me on the road! ;-) Have you guys also found out where those settings can be viewed on the phone set? Because with the 46xx it was in the options menu ... but in the 96xx I can't find those things.

to be correct: I meant offcourse backup through FTP. ;-) But as far as I can lookup it must be indeed HTTP. But it seems that the fileserver which is acting as fileserver (firmware, settings file) can't be used as backup/restore server. Because it is conflicting each other with incoming and...

Does anyone know how to configure the backup/restore feature on a 96xx phone? Is this through http? Because I tried it with the TFTPSRVR option in my scope option 242, but it seems that the phone isn't doing anything with it! And I can't find any related documentation on it!!! Many thanks!!!! :-)

No G700 doesn't support DHCP as far as I know. Only the small ones like G3/2/150 can act as DHCP server.

You can always install the default 10-user ODBC server. You can check it on you CMS if it is allready installed/running with following command: ps -ef | grep oplrqb and stopping and starting it with: cd /cms/dc/odbc ./odbc_init -r 1 or 0 (0=stop, 1=start) if the above doesn't give you...

Dwalin, The 46xxsettings.txt is only to actually dial outside. Not for your displayed nrs. Maybe you can also check on the system-parameters the following parameter: national/international CPN prefix Have you also did a station trace of a call when it comes in? Just to see what has been sent...

Hi! 1. Tools --> Options --> scripting --> fill in userID to use for scripting 2. Open your report that you want to use via script 3. If you view the output, then go through menu Report --> Script --> save the file to your drive 4. schedule the report with scheduling software in windows That...

You have to do 2 things: - install the openlink server software on your CMS - install the openlink client software on your machine where you want to run the sql commands. The installatie is very easy with the ODBC manual of avaya. So just look that up via support site and you'll be typing the...

What is the appropriate manner to dialin into an S8500b? I'v tried different scenario's as described in thread690-1068519 but none of them seem to work for me. so my questions: - in what USB slot do I insert the modem? (front or back of server or USB slot on RMB card) - do I need to enable the...