I did this a few yesrs ago on a 2616. What I used was
- MCA card and power supply option
- D9-D25 modem cable
- PC Drivers,"Symposium Desktop TAPI SP for MCA Ver2.0"
- CTI app, I bought Procall 2.1 single user
Procall is an add-in to MS Outlook, lots of features, allows the use of exchange...
Thanks.
I've looked on eBay, but there is nothing at present. If anyone has one in there spares cupboard and is prepared to part with it, then let me know.
The "telecorpinc" price is still high for the age of this technology. I'll wait and look around. Thks SG
Hi guys
I'm trying to get a 2nd-hand "MCK E-1000U-RNM EXTENDER" unit.
Does anyone have one or know where I might get one ?
Any ideas would be appreciated.
Thanks SG
Thanks John. Probably the product I have heard about is for dial up. For Agent phones, to work from home.
I remember one product also allowed a 2400BPS channel for a computer connection.
Does this ring a bell with anyone.
Can anyone point me to a product for extending a 2616 phones, out to a remote site over a data circuit.
I know this was quit common before IP options became available. I only want to do 2 phones off an old Option 51 system. I have RS232 and X21 circuits available to the remote site.
Any...
Options include - dial the new DN and see who answers. - look at the TN's either side as they may have been in logical order. - look at old printouts/dumps/MDF reocords if you have them. - disable the TN and wait for a fault call - trace the cable pair thu to the phone. SG
Why don't you settle the outstanding bill? These guys know your site and can probably fix the problem quite quickly. You may need them again in the future.
hello everyone.
I would like to move my Op11 Expansion shelf (only), over to another building (about 1km away ).
The cabinets are currently connected via 10 metre plastic Fibre, Using -
NTBK54AC MFI and NTBK55AC EFI units.
I have multimode fibre cable available between buildings.
Is there a...
Can you replace the daughter boards with 100BaseT boards, and then use new external 100BaseT/100BaseF converters?
It could work out cheaper, if its possible. NZTECH
( masbar - is your link correct?)
Hi
The * digit is translated to a pause on analog trunks, I think. But after the dial timer, times out ( or you press # ). the * will go to trunk as a *.
SG
Yes
Best option is to use spare serial port on Network routers.
I have D-channel running between two sites using cisco routers. Router interface has DCE cable attached. Network guys set up the serial tunnel (STUN).
SG
Hi everyone
I have VNS set up between two sites. Op11 to Op51
With just using the Public Network for VNS it works fine.
But when adding a two private 4 wire E&M ties as first choice, with public network as second choice route, the following happen.
Digital Set calls using the 4 wire trunks don't...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.