Search results for query: *

Just wanted to make an update. I've tried all the utilities that are recommended on here, and so far the most complete solution for me has been GetDataBack. Granted I am only using the trial versions of each program. Each program I tried so far has been able to find most of my files, but...

I have two hdd's on my system. One is a 20GB hdd that I have been using to back up my data, my other hdd is a 40gb hdd I have my OS and etc on. I decided to back everything up and reinstall my OS because of performance issues, when I reinstalled my OS, windows no longer recognized my 20gb hdd. I...

well, it only goes down to 266mhz for the memory.. When I set it to detect the speed automatically it messes up the same as it would if I were to set it to 400mhz, but it seems to work perfectly at the lowest setting, so I'll leave it at that. I really appreciate the help you two have given me...

Well my bios says I have a 200mhz fsb. My processor is a pentium 4 2.4C northwood 800MHz FSB. I know they do something funny with their fsb to where its actually 1/4 what its listed but does this mean that using memory with higher than 200mhz bus speeds is pointless? I just assumed that even...

I have a PT880 Neo motherboard from MSI and with an intel processor. I recently changed from DDR 266 to 2 matched pairs of 512MB each Corsair ddr memory sticks that are supposed to be ddr 400. Initially I left my bios like it was set for the previous ram I had in it, it was set for 266mhz, and...

Hi, I'm having this problem lately when I use Internet Explorer. It has only ever happened while using IE and only in the past few weeks. What has been happening is, every once in a while, I'll open an instance of internet explorer, I'll go to any site, the page will come up and after it loads...

I removed everything and let windows set everything up fresh and that definitely seems to have made a differences. I like it much better that way too; I only have what I need to have installed on there. Thanks for all the help you guys! :)

I don't know what kind of a browser setting it could have been. I didn't have a problem until I installed a network card. Its not just any old site, it happens frequently enough to where I know its not just slow sites. I can't give it an IP. I guess its because I have my cable modem hooked up...

Hello, I just recently bought and installed a network card in my computer. It installed without a problem, but I noticed afterwards that my dial-up connection would hesitate for about 10 seconds before sites would respond every once in a while. My network card is not connected to anything and...

okay, well I dont intend it to be constants, Im just starting out like that to test it :) And I made the necessary changes to change the registers to byte registers instead of DWORDS but it still crashes if the array I try to pass has more than 3 elements (c[2]).. any ideas about that part of it?

when I was pasting my assembly program in I skipped over a line, I only realized it after reading through it for the 3rd time... its supposed to say mov ebx, [ebp] below mov ebp, esp .. I hope that doesnt make things more confusing

Im trying to write a dll in assembly language that I can pass a pointer to an array from my c++ program to, to be modified.. I thought I had it figured out, but it crashes if the elements are more than 2, so I know Im doing it wrong Here is what I have for my program so far... in the c++ part...

About half of the times I try to change a file's (in the C drive) name or delete it or move it, it checks to see if there is a disk in the A drive, and I dont like that. I know its not normally supposed to do that.. I've been trying to think of things that might be causing it, I use windows 98...

I've been making a screensaver for someone and testing it out on my computer, its almost done but I keep having this problem... I dont know very many methods for making screensavers, but mine uses the settimer and wm_timer to do the animation stuff and it all works fine, but I leave it running...

Thanks alot, I looked in the microsoft KB and sure enough, there it was, just like you said I'll put a link to it in this just in case someone else has the same problem http://support.microsoft.com/default.aspx?scid=kb;en-us;Q79212

I've been trying to use TransparentBlt in a screensaver APP Im making on Visual C++ 6.0, Im using windows 98. My problem has been that it seems to be eating up all my resources eventually freezing my comp or severely affecting its performance.. Im almost positive it isnt a result of how it has...

I figured out what the problem was no more than an hour or so after I posted this... The data types from VB to VC++ dont match and it was causing it to freeze I guess.. I changed the data types in VB to long instead of integer and it worked, I am sorry for taking up space on the forum, but I...

This program is pointless, I was writing it to try out things before I wrote what I needed.. What this is doing is comparing vb multiplication time, to c++ multiplication time.. which I realize this might not be a great way, but thats not the point. I am not sure what the problem is, I know its...

wow, that was easy, thanks! :)

Hello, I am using Microsoft Visual C++ 6, I have one or two programs where I am trying to use winuser.h, mostly for the getcursorpos and setcursor functions, I know I can use afxwin.h for these, but I didnt wana use the mfc shared dll thing I get these 2 errors when I try to include winuser.h...