Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Beesboss

    AlohaMGR, can't login after rebuilding disk

    Majic, Thanks, and thanks also Coorsman, for talking me off the ledge... Majic, what you said rang a bell, as IBERDIR did not point at Aloha, so I knew the install was not right. Reinstall came right up with NP. All I have to do is mop up the redundancy, and I'm back in biz. Thanks again
  2. Beesboss

    AlohaMGR, can't login after rebuilding disk

    Coorsman, Thanks for the quick reply. I am not having success. I am working through what may have been my mistake in capturing the password resetting, so I have 3 sets of DATA folders to try. But first, I need to confirm with you the dbconfig settings, per the list below: Selected...
  3. Beesboss

    AlohaMGR, can't login after rebuilding disk

    I had another HD crash and have rebuilt the computer, got it networking fine (sees TERMs, Terms see it, Shares are indicated). But time ran out on redundancy this AM, and I can't get control of the AlohaMGR (6.5.16 on XP), all logins fail with this this error message: (The user could not be...
  4. Beesboss

    AlohaMGR ID & Pwsd on a fresh install?

    Thanks Coorsman, you were helpful again. Even though the old login was gone and I couldn't recover it this way, I was able to take another manager ID, add a numeric pswd at the terminal, copy DATA from that terminal and get into BOH. And point taken about the backups. Everyone else who reads...
  5. Beesboss

    AlohaMGR ID & Pwsd on a fresh install?

    I had a BOH HD fail and it was unrecoverable. So a new HD was installed, XP SP2 installed. Aloha tech said copy Aloha folder from Master terminal which is running as the fileserver since the crash, and then use my 6.5.15 CD to install over that so I would have all the employee/menu stuff I...
  6. Beesboss

    Replace a 1510 with a 1210 or 1220

    Thanks for the response. I appreciate your help.
  7. Beesboss

    Replace a 1510 with a 1210 or 1220

    Will I have any issues related to screen size difference if I replace a Radiant 1510 terminal with a 1210 or 1220 terminal? Other than the usual Aloha fun and and games?
  8. Beesboss

    OPOS MSR restart, MSR controller.

    XP They are not doing the re-image in-house, so they are shipping 2 ways. That's part or the time also. Was recommended to roll back the driver and go with a keyboard wedge, which I should be able to get working. The tech said keyboard wedge is PCI compliant today but iffy going forward. The...
  9. Beesboss

    OPOS MSR restart, MSR controller.

    Found out from dealer that my terminals are too old to support OPOS and I needed a new image (repair @ 600 ea + weeks of waiting) or buy new (1800 ea). Salesman said they would be OK. Not happy.
  10. Beesboss

    OPOS MSR restart, MSR controller.

    Thanks for trying, I appreciate your investment of time. One final thing, I noticed the model is 1510-0240, and remembered seeing that the models listed were -3xxx, -4xxx. Is this an issue? I'll probably just take a terminal in to the dealer andlet them figure it out $$$. Thanks again.
  11. Beesboss

    OPOS MSR restart, MSR controller.

    BIGGBYNinja, Yes, 3.5.0.1, Radiant Hardware Settings (still uses the old icon). Has 2 more tabs than the old driver. Boots were performed, terminal only, then whole system. Set to OPOS, RSMsr as instructed, save and booted. The only difference is Utilities/ Refresh Data, so I did that just now...
  12. Beesboss

    OPOS MSR restart, MSR controller.

    Results not good: I feel the driver uninstall/reinstall-new went perfectly, but the MSR does not test right. Under the MSR test, CP>15xx settings> OPOS>MSR, when I select RSMsr from the dropdown, I still get the 'Failed to Open MSR Controller (107) 101:0' When I swipe, the data does not...
  13. Beesboss

    OPOS MSR restart, MSR controller.

    BIGGBYNinja, Thanks for your time to post the clear instructions and to make the uploads. I'll post the results when I get a chance to install, but it may be all weekend.
  14. Beesboss

    OPOS MSR restart, MSR controller.

    Yes, it is disabled. Enable/disable does not make a difference. I went to debout file to see if if anything is there, found Error loaded IberStr.dll version 5.2.1.x. I checked and 6.5.16 is in the Aloha/BIN folder, so am going to check the registry. Be back later.
  15. Beesboss

    OPOS MSR restart, MSR controller.

    We recently upgraded to Aloha 6.5.16 FOH&BOH and the server and both terminals work well. My next step is to get CCs swiped on the integral MSRs on the 1510 terminals. Previous owners, more than 3 years ago, had the system up and running, probably on 5.3.xx. I set up from there server OK...
  16. Beesboss

    What name for OPOS in Aloha?

    Thanks for your responses. They sound a lot better than "Janie" and "Sara", and now I don't have to explain anything to my wife...
  17. Beesboss

    What name for OPOS in Aloha?

    In setting the MSRs, after you select OPOS MSR, what name do you use for OPOS? Aloha 6.5.16, XP.
  18. Beesboss

    AlohaMgr upgrade to 6.5.16 has lost userid/pswd info

    Yes, this worked. I went back to 5.3. On the terminal I tool an ID and assigned it a password, which is numeric at this point. I reinstalled 6.5 and used the emp# as ID and the numeric password for the login. AlohaMgr then went to ChangePswd where it then required a more secure alpha-numeric...
  19. Beesboss

    AlohaMgr upgrade to 6.5.16 has lost userid/pswd info

    Answering my own thread! This is so anyone with similar problem will have the (reported) answer. I'll try to report back if this works as advertised. He said there is not a default id/pswd. He said the admin login set up on 5.3 would be active on 6.5. But since I don't have that, I need to go...
  20. Beesboss

    AlohaMgr upgrade to 6.5.16 has lost userid/pswd info

    Newbie upgrade issue: In upgrading a 2 term / server TS setup from 5.3.xx to 6.5.16, several things on the disk they gave me did not work correctly, but I worked through them. After getting the 2 terminals updated (TS) without problems, Ctlsrv problems were fixed by running the correct line from...

Part and Inventory Search

Back
Top