Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. PederChr

    Anyone running 802.1x auth. on Baystack?

    YES! We do! With IAS... Got it to work ?
  2. PederChr

    Help me enable SFFD on 8616SX-E board

    why not juse LACP ?
  3. PederChr

    BCN Info needed

    what sw do you run ? type: stamp and what files are on the flash type: dir 1: SRML is the consol port, there is a strange cabel.. I don't have the pinout :-(
  4. PederChr

    VLAN issues 450-24t

    PVID! that's our problem i think.. Change the PVID on the ports to reflect the vlan number (turn on auto pvid) Hope it helps
  5. PederChr

    Contivity 1010 - One Armed mode

    yes.. you can use it as one armed mode, without dot1q. but you need to use the private interface, and you may want to disable the managment gui.
  6. PederChr

    5510 Unit Falling out of Stack

    And if you have STP enable it takes time..
  7. PederChr

    Password Recovery

    You need to boot the 5430 on a "reset-pwd-image" You must contact nortel to get the file.. og try google.
  8. PederChr

    Bay Satck ARN Configurations or Site Manager help

    Forget site manager use BCC.. :-) What's you mision ?
  9. PederChr

    Contivity 1100 configuration help

    Set both interfaces as private, and turn on Contivity fw. (turn of NAT) When you change the interface to private,you need to reboot. This should work, it works for me..
  10. PederChr

    Contivity 1010 Opinions

    Contivity is stable, you can use the CLI also to configure.
  11. PederChr

    5510 Unit Falling out of Stack

    UPGRADE ! We had the same problem, and a upgrade did solve the problem.
  12. PederChr

    Management IP stops responding on BS 5510 but still forwards packets

    UPGRADE! 3.x code is crap!
  13. PederChr

    Alteon 5114 Join Command

    yes.. if you take join the new server will be a part of the cluster.
  14. PederChr

    Passport 8600: All Telnet sessions in use. Kill via JDM?

    from the consol port ! Passport-8610:6# clear telnet 1
  15. PederChr

    Contivity 600 Password recovery

    there is a backdoor password.. But I have it..: -(
  16. PederChr

    How to setup a default route on ARN

    0.0.0.0/0 mean default route, this route match everything. For public side you often use 0.0.0.0/0 next-hop is ISP router interface. and for private side you use more spesefic route 172.0.0/16 next-hop router on private network.
  17. PederChr

    Passport 8006 y BPS2000, vlans

    english please..
  18. PederChr

    AN and ARN

    telnet to the unit, or use consoll! login with : Manager write: "bcc" this will load a config consoll. write: "config" you get in config mode write: "show config -all" will give you the config. But you can't install cisco..2600 is a old crap router.. If you want a good router, you get some...
  19. PederChr

    Problem with Contivity Client

    What ver? Tried last ?
  20. PederChr

    Transfering Nortel VPN Client Profiles

    you can also take a copy of the ldap. or show running-config file-url "name-on-file" if you ftp the ces, /system/runconf you will find the file. you can also upload the file, and get it executed. ftp file to /prov but you have to add some line to the config file. enable "password" conf t

Part and Inventory Search

Back
Top