Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
VPN Routing Help
Uninstall the protocol from the properties of the network interface card properties.- Syty
- Post #3
- Forum: Virtual Private Networks (VPN)
-
Tunnel Routing?
I haven't had this issue from a pix before, but here are my thoughts... Hope this helps. Most obviously can the home user create a direct connection from the home network to the hosted facility? If not...Do you keep a local copy of the websites on the HQ network? If so, then have the user...- Syty
- Post #2
- Forum: Virtual Private Networks (VPN)
-
VPN to remote network
If you were local to the site you wouldn't log on to each machine individually, why would you configure a separate port connection for each remote PC? As far as your inability to connect to the first PC, what is your configuration at this point? Hanoi is on the money with site to site, but...- Syty
- Post #4
- Forum: Virtual Private Networks (VPN)
-
VPN to remote network
If you have a machine that is located on the remote site and unused, you can use it as a relay and remote to it. because it's on the private subnet you'll be able to use it to reach all other IPs. It'll be logically similar using a commserver type router when administering console objects on...- Syty
- Post #3
- Forum: Virtual Private Networks (VPN)
-
Banner Screen Help!
You'll need to know what "information" the continue button is passing to the server. Just add that command line or AsciiKey value that is generated when the command button (continue) is clicked. Adding that statement in the vbscript at the place will cause that "message window" close. The...- Syty
- Post #2
- Forum: Virtual Private Networks (VPN)
-
Stop user going on Internet, but let him access LAN
If you remove the gateway and it's an internal router, the user will not be able to route even the local subnet. We can't assume the architecture of the network. -
desktop monitring
You need to obtain the Resource Kit. In it is a the Remote Desktop Admin. You will run a very similar RDP (Remote Desktop Protocol) to do so. if you are trying to assist users from a remote workstation, you can always, configure NetMeeting, then deny 1270 and 1503 ports at the firewall to...- Syty
- Post #2
- Forum: Microsoft: Windows servers
-
Account Locked Out...why?
open gpedit.msc on the machien in question or connect remotely. You have many places a Group Policy can be defined. Looking at the Domain policy only shows the domain policy obviously. There are "Effective Settings" you want to pay attention to. gpresult is good for many things...- Syty
- Post #6
- Forum: Microsoft: Windows servers
-
Stop user going on Internet, but let him access LAN
Wow....that's a lot of work to stop one person from hitting the internet. why not just statically assign his ip address, subnet mask, and gateway. Then reserve his IP like you would a server from DHCP -- Then add the following to your outbound access list on the router like the... -
Cisco 2501, can't console in...
There are no student versions. You can however, give yoru flash to someone who has it and let them upgrade it, then move the RAM back into your router, (Not sure who's crazy enough to do that however) As far as the capacity, you can get 12.3.5a if you really wanted, but the tests are based on... -
How to view traffic.
On a cisco router you can use the debug ip packet <access-list #> it's alittle cumbersome, but for specific tracking (not to be left on all day) you can assing an implicit permit access list for any given IP and then debug that Access list. You can use extended access lists to watch someone on... -
How to view traffic.
If you are using a hub on your network, you will be just fine. If you are using a switch, you will not see the traffic taht is put off of another switchport due to separate Collision Domains Interconnecting Cisco Network Devices ISBN: 1-57870-111-2. Read about Broadcast Domains and Collision... -
How to view traffic.
Menny, download a packet sniffer for that purpose. Most will allow you to track an IP or even a specific MAC as the source, or destination. I personally use EtherPeek for mine, but there are MANY -
Using Hyperterminal on the console port
1-8 2-7 3-6 4-5 5-4 6-3 7-2 8-1 Rolled for cisco -
Using Hyperterminal on the console port
It's not hyperterminal, what exactly are you getting on the screen? It works just fine on the other router, eliminates your misconfiguring HT, you have already verified your settings, and the cable is good. If you are getting the "Press RETURN to get started!" statement, then it's... -
startup printer mapping script
Why use a vb script to map a printer at startup? just give the machine a.......... net use lpt1: \\servername\printer /persistent:yes ???????? You are modifying registry values for something that is mapped to the HKCU in the registry. This is rewritten everytime a user logs on and logs...- Syty
- Post #10
- Forum: Microsoft: Windows servers
-
PLEASE HELP!!
If you use a proxy server on your internal network and the user is not configured at home to use said proxy server in their internet browser, (assuming they are getting an IP when RAS'd in) They wouldn't have one from their house. They would be surfing the web from your local network. Add the...- Syty
- Post #2
- Forum: Remote access
-
ACL and routing
You have have had a problem with the application of the access-list. I'm not sure what seeing your configuration will do at this point. can you see the other router without the access-list? One more thing, your stopping 3127 and 3198, won't do you much good, as the Novarg Virus uses 3127... -
Newbie - cannot connect to internet from new subnet
NAT statements on the firewall (I assume you are overloading addresses to the internet) relies on permit statements. Make sure that not only the firewall permits traffic from the .2.x network, but the NAT overload statement is dependant on access lists, check with your firewall administrator... -
¿How to use the cross cable? Loopback address?
if you make a hosts entry you will be able to connect via hostname. If you are connecting to a web server, then use your web browser. you may be hitting the box, but not on port 80 Pinging will use port 7 telnet will use port 23 nslookup will look for the machine, but will be looking for a...
