Search results for query: *

Many thanks sizbut for the advice, I will check it out and update you Thanks again [bigsmile]

No I don't have an http backup server configured, where would that be configured?

Im pretty sure you can add and use contacts on the individual handset directory this way, Im not trying to use the IPO as reference but the J129 handset.

I have recently installed an IPO 11 with J129 and J139 handsets, whilst I know that the J129 handsets cannot access the system/personal directories on the IPO itself, I am getting an error whilst adding them via the handset to the handset contact list Pressing the contacts button Pressing new...

Hi Im having issues with Gamma Sip Trunks on an IP Office 9.0 SU 12. The trunk works fine for incoming and outgoing for about 2 days then goes out of service, Im using a Draytek 2820 and using open ports to pass 5060 UDP/TCP and Stun port to the IPO along with the relevant firewall rules in...

Soooo... After a bit more investigation and a site visit from myself to find out exactly whats going on instead of relying on other people versions of the story, it turns out that the Rls 3 has already has already been patched with the SU and is running at the same version of firmware on the...

Thanks for the info guys, It works but I now seem to have a few issues with the trunk going out of service after a few days, I can recieve and make calls but it seems to go out of service overnight after 2-3 days, I can still ping the Gamma ip address from the IPO with the trunk OOS but cannot...

Can anyone tell me where I can find the BCM 50 SU patches now, Avaya have now taken them down from the support website. I am specifically looking for a BCM50 Rls 3 SRG patch, I had to replace a hard drive on a failed unit and have had problems since, I know it was patched back in the day cos I...

Guys A big thank you, all sorted [2thumbsup].. wrong ITSP proxy address..doh!![hourglass]

Thanks Janni78, to be fair I had this set to LAN1 earlier but it didnt work then so trial and error came into play (more error to be fair), I have set it again to LAN1 to no avail, also Ive forward the IPO RTP ports..

Thanks for the info guys but Im still getting no joy, Ive attached some screenshots of my config, again any pointers would be appreciated.. Draytek ports opened are UDP 5060 and I also tried 6000-40000 towards the internal ip address of the IPO but made no difference Monitor brings up this...

Hi Im am trying to set up Gamma trunks on an existing IPO 9.0 through a Draytek 2820, I have read a few previous posts for some pointers but not having much joy.. The IPO is on lan 1 due to TAPI being used, the Gamma trunks are across a BT broadband with a single static (say 81.149.x.x) and i...

Great Thanks for the info..[bigsmile]

Can anyone tell me if a V1 ATM combo card is compatible with a IPO 500 V2 running 9.1? Thanks [bigsmile]

Hi I am having trouble with the Web Self Admin page and accessing the recording tab, I can access the user self admin page and use all the other features apart from access the recordings tab, it doesn't appear. I have enabled media manager replay for all recordings and download but the tab...

Guys thanks for the advice... Sometimes its the bleeding obvious that trips you up.. Turns out the IT man had changed the gateway address at Site A about 6 month ago after the IPO was in but before the VPN tunnels were created and didn't let anyone know because "its my network, and only I need...

I hope someone can help, this is driving me mad.. I am trying to get some ip phones (9620 x 5) working accross a vpn connection via 2 Draytek routers Site A has a Vigor 2860,internet connection with multi static addresses and is working fine. The IP office (R8) is at site A Address range...

Scrap the previous messages... It turns out they want to use a WebRTC program that they have developed that seems to use a cloud based Taxi screen popping user and want to intergrate the IPO onto it.. Why they dont get the current ISDN2 numbers onto the cloud and utilise it that way is beyond...

Hi They are trying to get a taxi software program thats hosted off site in the cloud to intergrate with TAPI or use a SIP trunk for connectivity and pass the CLID to the software...hard work just for screen popping if you ask me.. Cheers

Leading on from my previous post... it seems that the customer wants to send the tapi info to an external cloud server, works ok onto an PC with an internal device, I have told them that this cant be done, am I right? They have also purchased a single SIP trunk licence as a trial to see if they...