Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. opusx2

    Nortel option 11C route digits to VM

    I'm sorta new to pbx programming and hopefully by saturday night, I won't need to do any more of this on the Nortel (putting in the Cisco to full production). I'm don't know how to do what you are asking so if you can lay out what commands under what overlay that I need to do, I'd really really...
  2. opusx2

    Nortel option 11C route digits to VM

    johnpoole, can I add additional digits to the fdn? when I dsc the digits to cisco, all it does is ring a call handler where it plays a greeting. If I can add a * and forward to the cisco the extension, it'll do directly to that person's voicemail so that they don't have to listen to the greeting.
  3. opusx2

    Nortel option 11C route digits to VM

    People already have cisco handsets on their desks. If someone left a message in the AVVID, their cisco phone would light up. I just need to somehow forward a call destined to a DN on the 11C to AVVID and append *<ext> so that it'll go directly to that person's voicemail in AVVID
  4. opusx2

    Nortel option 11C route digits to VM

    I have an option 11C that's currently connected to a Cisco AVVID system via a PRI card. I'm currently routing some DN's in the Nortel System to the AVVID. I didn't setup this routing but I was told that if I ever needed to route additional numbers to the AVVID, I should go to LD 87 and do a...
  5. opusx2

    Can't load apps in Application Builder.

    Currently running CallPilot Administrator Client ver. 1.07 (Build 01.07.09.05) I figured out a work around on what I needed to do. Basically, we were faced with having to change our standard automated greeting with an emergency greeting due to hurricane Katrina. Even though I wasn't able to...
  6. opusx2

    Can't load apps in Application Builder.

    I uninstalled and reinstalled the CallPilot Admin Client (with reboots after each process) and I still can't load any apps. I also can't create any application. Both give me the same error message.
  7. opusx2

    Can't load apps in Application Builder.

    Not sure on how to reload Application Builder. I have a CD that has CallPilot Admin Client. Is this the CD that I use?
  8. opusx2

    Can't load apps in Application Builder.

    I can ping the CP server from the machine that I'm trying to open the Application Builder from.
  9. opusx2

    Can't load apps in Application Builder.

    Currently running CallPilot server 1.07.09. I can't seem to open any applications in Application Builder. When I click on File/Open, I see the list of applications, but can't open it. What can I do to get access to these applications?
  10. opusx2

    Callpilot 1.07 low on storage

    In my quest to free up additional space on our Call Pilot Server, I discovered that I have a fine in 2 different locations. The filename is bluedat1.db and it's located: D:\nortel\database and D:\nortel\sysops\backup\database Looking at the one in the backup folder it looks like haven't been...
  11. opusx2

    Callpilot 1.07 low on storage

    Thanks for the response John, I looked at the backup settings and from the logs, it looks like all the backups are going to the primary tape device. *If* there are backups on the hard drive, what filename/location would they be under? Is it safe to do a chkdsk or defrag on the data drive?
  12. opusx2

    Callpilot 1.07 low on storage

    We have a Callpilot 201i running 1.07 server/client. For the past few months we've been battling storage issues on Callpilot. As it sits now, we have about 2% storage free out of the initial 4GB partition which translates to about 82MB free. What made us aware of the storage problem is a...
  13. opusx2

    Phaser 860 Report Fault

    Report Fault: 15,004.45 :32075 Anyone has any idea what this is?
  14. opusx2

    Supernetting

    We recently changed a single class C subnet 192.168.1.0 255.255.255.0 to a supernet with 3 class C's just like yours, 192.168.1.0-192.168.3.255 with a subnet mask of 255.255.252.0. We had to change all our internal servers' subnet mask to reflect the supernet and redefine the DHCP scope in NT...
  15. opusx2

    XP and 98 networking problems

    The router is assigning the IP via DHCP. I'm pinging from and to both machines via IP address only. I've tried sharing the entire C drive on the 98 machine with no password setup but the XP machine was not able to browse to the machine.
  16. opusx2

    XP and 98 networking problems

    Hi all, Here is the setup: The user is behind a cable modem connected to a linksys router. There are two computers connected to the linksys router. One is a laptop running XP-Pro and the other is a desktop running 98SE. Both computers can surf the Internet and can ping the router. The 98...
  17. opusx2

    Windows' Task Scheduler

    Can you list a few ways to stop browsing of workstations?
  18. opusx2

    Windows' Task Scheduler

    On our Windows network, I am able to browse the network, open a computer on that network and get access to its task scheduler. Now, I've disabled the task scheduler from running that computer, but why am I still able to create a blank task? Would it be possible to flood the computer with all...
  19. opusx2

    BDC Can't ping certain IPs that other PC's can on the same network

    We have a BDC that serves printers for our company. There is a printer on a certain IP address that the BDC can't communicate with. But all the other computers on the same network is able to ping this printer. The BDC is able to ping everything else on the network. Any suggestions?
  20. opusx2

    How do I duplicate all mail going through the server?

    Thank you very much for your help.

Part and Inventory Search

Back
Top