Search results for query: *

Had already tried disabling PRI's. After orginal post I deteremined I was also having issues at some of my BO's regarding trnfers etc (H323). What AVAYA has now told me is I've reached a buffer in the TRO buffer and the only way to clear that is with an INI, which I did and it did clear the...

I’m having an issue with several systems on my network. I’ve got a couple 1000E’s (6.0) connected back to CS100K MG (6.0) via PRI and an Option 11C (25.40b) connected via PRI to the same CS1000K MG. The issue is when a call that originates from outside the remote site and fwd no answers or...

What are the phones doing when you try to download the firmware? Are they locking up and in the display screen you see "Connecting to Server". If you have another system on your network like a CS1000E or a MG system that is running IP phones (1200's) that you can reach over the network enter...

What I did was bypass the SRG. So on the phone for s1 I sent it to the main office the first time and after the firware download was completed I went back in and changed the s1 address to the SRG and everything worked fine. This was a 5.0 SRG and I just finished an SRG at 6.0 and had to doe...

In the process of installing a new SRG 50 using 1200 Series phones. I've tried several 1220's and 1 1230 phone and they are all doing the same. During the boot process the phone stop and this message appears on the screen "Connecting to Server". I've tried a phone that was manufactured in...

Couple times this week I've noticed in my history files aud314's for valid tn's. However, those tn's are not M3000 sets. Each time the aud code is ran it lists two separate TN's multiple times. The first appearance of these codes it ran about 30 consecutive codes aud314 00000A8C and aud314...

Has anyone used the new NTRB33BBE5's yet? It's a single port FIJI card and I've read the bullentin (2009009291,REV 1) and I've been involved with a previous upgrade from IGS to FNF, but we used the old dual port FIJI cards. Are there any gotcha's with the new cards I should be aware of...

Thanks.

I've heard a couple of rumors that SRG is EOL. Is there any truth to this? My customer has even heard this and is wondering if its true. Thanks

Solution: For the audible time and date stamp issue. Re-run the config wizard and re-install the language disk. It fixed my problem for mailbox pwd reset, and new mlbx activation. The time stamp issue I mentioned: changed my elan IP address from the config wizard and now I'm back on -5...

We just did a migration from 4.0 703T to 5.0 1005r. We are having the same issue on existing mailboxes where we have reset a password. When you log into the mailbox, after the system tells you the temporary password has to be changed, you get an immediate tone and a message that says "Your...

Just FYI the INI on the switch side didn't change things..Any ideas???

CS 1000M MG running 4.5W CallPilot 703T running 4.04.04 SU2. As you know you can't put a CDN in the OVDN prompt for an ACD to overflow a queue to VM. My work around for this was to use the acd (the 2008 ‘s for CP) and build an SDN pointing that number to voice messaging. Well it has just...

I’m seeing some errors on an Option 11C running 25.40b that I’ve never seen before. A few days back these codes appeared and during Midnight’s the system INI’d. Here are the errors I’ve noticed doing a history check today. This is a single cabinet and no VM. I’ve checked the knowledge base...

Has anyone seen these errors before? I check the switch almost daily and I've seen this error message or a similar message 3 times in the past year. However this is the first time I've had an INI. There was quite some time between the error message and the INI. Just curious as to what may be...

Yeah I tried that. I found a tread on Nortel that referenced removing that file, so I deleted the file and still got the same error message. I just rebuilt the application because it was very small. So if I’ve missed a step or there’s a trick it would be nice to know.

It 04.04.04.04. I loaded the new or the pep what ever it called. I've been using this version of app builder for several months. Like I said I can get to the app's on this system it's just the one I can't reach...Thanks

CallPilot 4.04.04 with application builder is giving an error stating "The system could not load the application from the server. Please check the connection and try again". However I can open other applications on this same CP. Is there a way to recover this application...Thanks

Ok two for the price of one. First question. I have an Option 11 C running 25.30 and I’m using a tty 2 to capture acd info to a doc and then onto a web page for the end user to use. Well I noticed the web page has blank area from 12/20 on. Dialed into the switch and when I prt tty’s that tty...

I'm 4.50W. We've asked and asked the Cisco guys to do QSIG but we've got the run around. See thread 798-1314126. The Cisco guys asked for DMS and we have second guessed that since day one. I'm tempted to allow the free ini's. There're getting ready to roll out about 150 wireless cisco's...