Search results for query: *

we run quite a few fibre transport media servers here, and they all have the qlogic card installed. at the time it was the only hba that would work in target mode, which is what is needed for this to work Cheers richs24 [yoda]

do you have open file backups enabled for this client? If so, then that will be what is causign the problem. Go into the host properties of the master server, look under clients and see if this client is listed. if it is, click on it, click on the open file tab and see if it is using vsp. if...

Thank you. Cheers richs24 [yoda]

if you press ctrl-D, then it asks for a cc (as in email cc), and then pressing enter makes it work. WHy is it waiting for a cc? Cheers richs24 [yoda]

thanks for that, but as soon as i put the $ in, then it just sits there and doesnt return to the command line Cheers richs24 [yoda]

there are so many potential answers to this. do you only have 2 tape drives? are your storage units configured correctly? in theory, there is no reason why the duplicate job starts, but just stays queued waitign for the backup to finish. i take it that you have tested this when there are no...

Hi, i have the following script, where i'm looking for 2 different actions dependant on the outcome. However, no matter what i do, the script just performs the same action. can you help please cheers Rich #!/bin/ksh WORKING_DIR=/opt/openv/netbackup/scripts/daily...

how have you got your device set up? is it san attached or scsi? do you have any disk on the same bus? what you have to be careful of, is making sure that any disk devices are on different bus to your tape drives, otherwise any scsi reset sent to a disk, will also go to your drive as well...

i don't suppose that the file is password protected is it? Cheers richs24 [yoda]

hi, a bit of a weird one here. Got some system files under /var/tmp that have a prefix of D (not d to signal a directory). if you run a file on them, it comes back as being a 'doorway to a remoted provider'. these files are linked to a running process, but i have no idea what they are. Does...

check to make sure this is supported first. AS far as i was aware, Veritas were not being too helpful towards Legato, and as such, no testing was possible. Cheers richs24 [yoda]

Hi, i am having trouble backing a large(ish) netware volume. The volume itself is approx 220gb, netware 6.5, and the problem being, that every now and then the backup will get so far, and then restart. Has anyone seen this before cheers Ric Cheers richs24 [yoda]

Hi, i have been asked to do an upgrade of a master/media server from 3.4.1 to 4.5mp6. Is there anything that i need to be aware of? I am running on solaris 7. Will the pkgrm strip out all of my policies as well? Also, would you recommend staying at 4.5mp6, or moving on to version 5...

Hi, i know this isn't advice, but we are having the same problems as well. The only difference being, we are using Netbackup Enterprise vers 5mp1. Any help would be appreciated. Thanks Rich Cheers richs24 [yoda]

if you select the server install from the start, then that includes the storage node. Server install includes, server, storage node and client Storage node includes, client and storage node client includes, just client Cheers richs24 [yoda]

Hi, the problem with tape speed issues is always going to be finding where the bottleneck is. With your particular set up, the first thing that has to change is the number of drives per hba. 4 DLT7000 drives on one hba would kill it, let alone LTO's. Secondly, you need to establish the speed...

and if that doesn't work, try scavenging your media database Cheers richs24 [yoda]

you didn't mention which o/s and if this server has been upgraded. If you use solaris, and upgraded through version 6.0, seriously expect your media db to be corrupt. Cheers richs24 [yoda]

has this drive been defined in networker before you start Cheers richs24 [yoda]

find out what the hardware vendor says, and then follow the route it leads you down. You could spend hours trying to troubleshoot it through reboots and resets, when it's probably telling you there is a problem with the robot. If you still have the manual for the library, check it for sense key...