Search results for query: *

No kidding.... What I hate is that when you work with vendors on an issue, it is ALWAYS your fault. MCSE 2003 MCSA 2003 MCTS

Are all the comptuers the same OS? Are all the computers on the same switch? MCSE 2003 MCSA 2003 MCTS

This almost sounds like video drivers got corrupted. Just for SnGs boot from an XP CD, choose recovery console, and run the chkdsk /F /R command just in case there is any bad blocks or bad sectors. Once that completes, see if you can log in. Once you can, then run sfc to check all the files...

Does this happen all the time? Does it just happen when everyone logs in? Is the server local or remote? Give details man! MCSE 2003 MCSA 2003 MCTS

291 is very difficult, you better know your networking(DNS, DHCP, subnetting, etc) 294 is difficult as well.

I like Self Test, same as Transcender, but about $30 cheaper.

Well finally got it fixed and it was the carrier. Just an FYI... The circuit was configured for 5ESS and it should of been DMS250, and the Swtich type was set to DEFAULT and it should of been set to MERIDIAN. This was all on the carrier side. Of course, they played stupid and said "I am...

I asked our phone tech about this and what we did was put the CSU in loopback and the B channels went idle and stayed idle, so he thinks the card is fine. We also confirmed that the D channel is configured as DMS 250, but need our carrier to confirm.

John, I tried as suggested and I get a bunch of PRI227. The carrier(verizon is playing dumb) cannot confirm if there is the SL1PROF enabled on the circuit. I did not have enough time to do the self test as this particular D channel is the source clock for a bunch of other TDMI tie lines.

which ld is that in? Also, when I was on the phone with Verizon, they think DMS 100/250 is the same as SL1 Profile, is this true?

Also, I see a bunch of PRI 227 errors I am wondering if Verizon removed the SL1 Profile during some maintenance. I just found it odd that the Verizon tech did not know what I was talking about. I think he thought it was DMS 100.

We have one T1 coming from Verizon. Last Thursday I was notified that we could not make long distance calls, but local(because we have a route to send it through POTs lines). I looked at the system and I saw errors of the D channel going down, then come back up. I ran a stat on loop 1, in ld...