Search results for query: *

We've also had a fair few that needed replacing after about 8 months.

I've seen this issue too on a new install of an IP500 on v8.1, although i've seen it happend to all users, closing and opening softconsole something solved the issue. Usally it happends once you start softconsole and go stright into changing the user forwarding option. I had to wait 60ish sec...

That was my though - why have a actual device that runs on Android, but no app! Doesn't make sense why Avaya haven't released an Android app, especially as they already it already!

Is flare app avalible on Andriod? its not on google play? Thanks

Does anyone know how to get the transfer call working on a Polycom VVX 1500? I have two setup on an IP500 V7 both works fine, but can't transfer calls to other extensions on the system. Any ideas? Thanks

Good luck" - are you saying that the IP Office firewall is not good?

Isnt this where the IP Office firewall come in handy? to stop hackers?

Hi Changing topology to none, and all working (Had an IP route to LAN2 already). (turn sip trunks off on LAN1 stopped it working!) Thanks

Just been trying to set this up and getting the following: OPTIONS sip:Unknown@83.245.6.81 SIP/2.0 Via: SIP/2.0/UDP 192.168.44.10:5060;rport;branch=z9hG4bKc5d6ef510b12e01b1bd9d4c27c32fd66 From: <sip:Unknown@83.245.6.81>;tag=0807a11994927081...

Hi Yes external IP, the Gamma doc, all I have is the info above and this: http://www.tek-tips.com/viewthread.cfm?qid=1563142 The IP office help files and the above don't match on 6.1! Thanks

Hi Thanks for the reply - however if the LAN2 is on a real IP, then I don't need to use STUN? I can change so the LAN2 is behind the firewall, does anyone have a STUN IP I can use? Also any ideas whay I put in the SIP URI section and SIP Credentials sectio on the SIP lines on 6.1? this had...

Hi Does anyone have examples configs or a guide on how to config SIP Trunks on IP 500 V6.1 (specifically Gamma) Using LAN2 port on a real IP address. Details of the sip trunks as follows: Configuration Details Gamma Telecom IPDC SIP signalling gateway address: 83.245.6.81 Please note that...

Hi Has anyone tried using Alchemy pots beyond 3.2? Was hoping I can re use one we have on newer firmware. Thanks

The Cisco network infrastructure was already in place before the system when in, as the SCN was working fine on V4, something in V5 was causing this to stop. As nothing on the Cisco side had changed and only stopped working in V5, it would be usefull I could pass any information on that would...

I was thinking on the lines of what the actual command was.

Does anyone know what the Cisco fixups/Inspect options is please?

Hello If you could fine a copy, it would be appreciated. Thanks

2.3 (24) is the version that had voice networking for the argent branch. Thanks

Does anyone know where I can get a copy of Alchemy 2.3 (24) admin CD? This is the copy they released with the memory upgrade for the Argent Branch. Thanks

Hello Would there be any issues with using a VCM30 PCS02 on a legacy card carrier on V5 software on the IP500? Would this work? Thanks