Search results for query: *

We are trying to get a trunk working between our Quintum BX ISDN to SIP gateway and our MD110. After trying many things, we are still unable to get the lines to work. The ISDN gateway vendor requires - Orientation: TE - TEI: 0 - Protocoli: BRI ETSI The md110 keeps returning the alarm 274...

And this is our rocap data for the same route rocap:rou=all; ROUTE CATEGORY DATA ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP 3 7110000000000010 5 3101000001 0 30 128 00151515 311100000030 111100 END

We added an extra ISDN-2 card in our MD110 BC12. We would like to enable outbound caller id for this trunk. It is connected to our SIP based PBX and we would like to show the internal extension number to the SIP PBX. We cannot find the right setting to configure this. roddp:dest=all; EXTERNAL...

Thanks whosrdaddy for the quick response! We have one lim only with about 300 extensions. It seems to be coming from many different extensions. On different ELU boards. Any idea how to find out on which board the problems is? Thanks!

Hi! We have some strange problems with our MD110 BC12. Every day we receive reports from our users that when they call to an external and sometimes internal telephone number, they can only hear the other side speak, while the other side does not hear the caller. After a lot of monitoring from...

Our clients tell us that about 10% of the times they call us, they get the message 'this number is not in use'. We already contacted our provider and they monitored our ISDN lines for a couple of weeks without finding any problems. Could it be an problem with the TMU board? We once in a month...

We have a problem with external calls. When someone is calling to an extension from outside and the extension is busy, the caller is getting an 'number not in use' messsage. Any idea how we can solve this problem?

Hi, thanks for your quick reply! This is my nutrp output. nutrp; NUMBER CONVERSION DATA ENTRY CNVTYP NUMTYP ROU TARDST PRE TRC NEWTYP CONT BCAP HLC 593641 0 0 1 5 0 593648...

We have a strange problem. Depending on the line a caller is connected on there is a different CLID displayed in the operator workstation. The basic number is the same, but sometimes with extra leading zero's. This prevents the directory manager from finding the description of the number in the...

Is there a way to enable some function in the MD110 to hear a kind of beep during a conversation to know that someone else is trying to call you? Is this also possible with DECT phones? We are running BC12SP3.

Thanks a lot! I replaced the Schottky diode and it worked like a charm!!!!

I tried to find the diode on the board, but still without success. Can someone please tell me were exactly this V145 diode is located? I posted an image below, mayby some can mark the location... (image posted on theimageplace.net)

Thanks for you're reaction. Do you have any idea which diode is broken? Mayby we can try to replace the dioded ourselfs.

For a year now we are experiencing a lot of 'dead' BS330 base stations. The power light led just turns off and never want to go on again. Does someone have a clue of what can be the cause of this? Are we the only one with couple of dead bs330's each year? Kind regards, Arjen

We are having a MD110 with BC11. When calling an in use extension the caller gets 'busy' in the display of the digital telephone, but the called extension does not get a tone that another one is calling him. How can we enable this feature? Is it possible? I already tried to enable intrusion in...