Search results for query: *

Thanks for the link I will read it over and if I have any further questions I will be sure to post them!! Being a recreational web designer I could not answer the question so I had to find out what would be best.. Thanks Again!! -FrankSoprano

What is the most commonly used desktop resolution used these days?? I am trying to figure out what resolution to design my page for.. I currently run 1280 x 1024... Should I design it for 1024 x 768?? Any input/suggestions would be greatly appreciated!! Thanks in advance -FrankSoprano

Thanks everyone for the response, I figured out what it was... I was going nuts with it, but the solution was to rename formmail.pl to something other then that :-) now it works fine.. I appreciate the responses! Thanks Again! FrankSoprano

I am in the process of trying to add a contact form to my site where visitors can input their Contact info, address, telephone number etc to my via a form that gets emailed to me from my site.. I have been messing with the formmail.pl script which doesnt seem to work for me, so I found the...

If you are missing drivers you can run cfgmgr against the cd-rom to pick off the necessary drives from the base cd of your version of AIX.. #cfgmgr -vi /dev/cd0

Deak, I do not know of any commands under 4.3.3 to eject the cd-rom but on 5.2 I know you can do it.. You just need to make sure the cdromd is running and then you can do cdeject cd0 but that is under 5.2.. Has your cd-rom behaved the same way since you got the cd out of the drive??? I would...

what does the uname -s do?

Does anyone have any idea on how to go about changing the CPU ID?? I was able to change the HostID but I cannot figure out where to change the CPU ID in memory?? I know you can do it in Solaris.. I am trying to make my machine think it is another machine for testing purposes until I reboot...

to make it simple and avoid messing anything up, why dont you un-cable the drive that you need to be rmt2 , do a rmdev -dl rmt1 and also a rmdev -dl rmt2 run cfgmgr display the tape drives you should only have rmt0 & rmt1... cable up the drive that you want to be rmt2, run cfgmgr and you...

Daneicher, Yes It should work fine for you!! I have used Quantum SDLT's on both 4.3.3 and 5.1 and 5.2 all on the base installation... Any problems let me know..

What settings should I use to connect to a Cisco router?? Currently on my Com1 properties I have it set as follows: Bits Per Second: 9600 baud Data Bits: 8 Parity: None Stop Bits: 1 Flow Control: None For the properties/settings I have the terminal set to autodetect... Any suggestions?

Anyone ever have any problems using HyperTerminal that comes with XP Pro?? The version I have is 5.1 ..... I cannot get HyperTerminal to respond to my keyboard, at first I thought it was my session settings, but I tried every different option and also downloaded another terminal emulator and I...

Learn something new everyday :-) Yea it would be for personal use only, and will not be under intensive read/writes at any given time.. Just need to have a large amount of disk space available to store all my files... Brand new those units cost a arm and a leg, been trying to find a used one or...

rclarke250, "You can not connect IDE drives to a scsi controller. IDE drives to IDE controllers, and scsi drives to a scsi controller,you can not mix them" Im well aware of that, but thats not what im looking to do.. Im looking for a scsi enclosure that will support EIDE drives and...

Can someone point me in the direction to finding some SCSI Disk Arrays that will hold IDE drives?? Thanks!

Never ran across that problem personally myself, but to start simple have you tried NFS mounting from the AIX system to the Linux system? Also is the Linux Box in the etc/hosts on the AIX system??? Have you tried Mounting the NFS share from the Linux box via IP instead of hostname??? Just...

Really wow thats strange, I am glad that I have posted this..... I have seen many clients have problems with LTO2's until they upgrade their level of TSM to 5.1.6.1 , I wonder what was the problem in your case that you could not use them until you upgraded to 5.1.7.3...... Did you work with IBM...

Directly quoted & stated from IBM LTO2 Drive functionality has been added in TSM 5.1.6.1 and later versions.. I have heard rumors that some have gotten lower versions of TSM to work with LTO2 drives, is this true?? and how so??? Thanks

on my P650 I can run 4.3.3 with no problems...

Are you using CD# 1 of the 4.3.3 set?? Have you tried going into SMS and manually selecting the CD-ROM as the bootdevice as opposed to hitting F5 or 5 as Chapter11 mentioned?? Are you getting any error LED's? Have you tried corrupting the NVRAM?? I think we need some more information on what...