Search results for query: *

Hello All, Any one has the below software image ? Ciac-gw-sw-k9-1.5.3_0.3.6.bin Regards, Ismail

hello all, Can any one help me with a low level configuration regarding Mitel SX-2000 to connect to cucm using PRI ? Thanks in advance. Regards, Regards, Ismail

we have cisco cm and unity ,,, the calls are forwarded to unity IVR and u can call the extension direct ,,, in case of call forward (user uses forward all) the call signalling connect two parties but no streaming ,, how can i solve this issue ? Regards, Ismail

Yes, every thing is done, but the problem was in signal type . I was using ground start then when I've changed it to loop start, it worked. Thank you for reply . Regards, Ismail

the call manager doesn't send call to the fxo port , although the fxo is registered to the call manager how can i solve this problem ?? please help Regards, Ismail

make sure that the chosen ip for each interface not the network name or the network broadcast ip router# show ip route and try to make sure that each router has the other in its routing table , if no try to inject it manually **for the two routers (config)# ip route ip mask (interface/ip...

try to use ; qualify=yes to keep Nat session opened Regards, Ismail

how can I send numbers digit by digit without the need to pree speaker key to make the call note: the overlap in configuration file is set to yes and no in other time and it didn't work !!! Regards, Ismail

you shoud get fired ,,, amguu Regards, Ismail

regarding to the converting programs vmu2wav && wav2vmu , you can find them on the knowledge base or post your and I will forward to you Regards, Ismail

you can use telnet using putty on port 23 , telnet <ip address of IPU or SIP > username : remote password : system password if the IPU behind NAT , port forwarding must be configured on the other side router Regards, Ismail

Asterisk™: The Definitive Guide 4th ed Regards, Ismailhttp://shop.oreilly.com/product/0636920025894.do?sortby=publicationDate#

remove bms completely and delete all files after uninstalling from its directory I C " C:\Program Files (x86)\Aastra\BMS" then install bms again and make sure to check box of the Notebook installation and User database server. Regards, Ismail

adocumentooooo :P Regards, Ismail

try to check the compact flash files especially ANNO4 directory for music on hold & when reloading voice files 4450 do not enter the number of board position keep pressing enter and don't care it will know the position automaticaly Regards, Ismail

f I 'll purchase any of digium cards , is there a necessary license ?? Regards, Ismail

if I 'll purchase any of digium cards , is there a necessary license ?? Regards, Ismail

loooooooooool Regards, Ismail

is there is an commercial license for asterisk , as I'm familiar with asterisk and I want to supply a company with it , so is it legal ? Regards, Ismail

done , thanks alot Regards, Ismail