BP250 export Automated Attendant wave files

[VoIP101]

Hi,

I have a customer that has an ancient BP250 telephone switch.
I'd like to export the embedded waves files from the VMU-HD 8 card.

Is that possible trough a X24 connection (remote modem), or can I get them from the embedded flashcard?
I also have an IPU16 IP card in the system.

In what file format would the wave files be then?

Thanks in advance,

 

[BPDeLuxe]

Hi

The files for voice prompts in BP250 are in the format .vmu therfor you can not just import/export files in format .wave.
You can export/import from one VMU-HD to another via a pc with the program BPinspect (FTP).
There is also two programs that can convert vmu files to Wav to vmu and the oposite with vmu to wav.
I would ask them to rerecord all nessesary prompts.

Good Luck

 

[VoIP101]

Thanks for your reply.
Can I just login with ftp to the BP250? What is the username/password and path?

What is the name of the software that can convert those files?
I only need to perform the procedure once, and there are quite a lot wave files.

The customer has bought a new Mitel system.

Sadly for the BP :-(

 

[Mouafy]

you can use telnet using putty on port 23 ,
telnet <ip address of IPU or SIP >
username : remote
password : system password

if the IPU behind NAT , port forwarding must be configured on the other side router

Regards,
Ismail

 

[Mouafy]

regarding to the converting programs vmu2wav && wav2vmu , you can find them on the knowledge base or post your and I will forward to you

Regards,
Ismail

 

[PABXVendor]

Hi,
May I know where I can find the vmu2wav file?