Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

FXO problem with MGCP 1760

Status
Not open for further replies.
Mouafy

Mouafy

Technical User
Jan 2, 2013
50
EG
the call manager doesn't send call to the fxo port , although the fxo is registered to the call manager

how can i solve this problem ??

please help

Regards,
Ismail
 
Sort by date Sort by votes
do you have a route pattern pointing the call to the FXO port?
have you tried running dialed number analyzer to make sure the call routing is right?
 
Upvote 0 Downvote
Yes, every thing is done, but the problem was in signal type . I was using ground start then when I've changed it to loop start, it worked.
Thank you for reply .

Regards,
Ismail
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Russell35674
  • Locked
  • Question
Cisco VG310/320 migrate from SCCP to MGCP
Replies
1
Views
257
whykap
whykap
wolf8963
  • Question
Grandstream HT841 with call manager
Replies
3
Views
247
wolf8963
wolf8963
keyset6
  • Locked
  • Question
Cisco Unity delay after Caller Input selection with Call Handler
Replies
1
Views
218
keyset6
keyset6
jgbmt
  • Locked
  • Question
Migrating PRI circuits from Nortel Option 81 to Cisco ISR 2921 MGCP Gateway
Replies
0
Views
74
jgbmt
jgbmt
Ruben A. Freitas
  • Locked
  • Question
system is operating with an insufficient number of licenses
Replies
5
Views
371
thepfy
thepfy

Part and Inventory Search

Sponsor

Back
Top