Search results for query: *

For 9608 issue : https://support.avaya.com/ext/index?page=content&id=SOLN337492 For SIP Registrar : https://downloads.avaya.com/css/P8/documents/101056066 (P22, updated recently), support says that it will be corrected in next release (July)

@tlpeter this is even more stupid when you have an entire site running Equinox without any hard phone ... I have a case open for that but R&D answer that this is work as designed but they need to update all documentation to reflect this change ! Anyone with gateway connected to a primary :) ?

@intrigrant this is normal behavior and work as designed :) . If you use Manager and have no SIP extension created, it will automatically disable SIP Registrar •SIP Registrar Enable Check that SIP Registrar Enable is selected. This setting is automatically disabled on systems with no SIP...

Does anyone have a set up with a primary and an ip500v2 as expansion running FP4 ? I have an issue on my lab (and at 1 customer site) : I cannot edit anything using web manager for my gateway. Everything is fine on primary! Logs states an issue with web services ... 10:25:10 65634223mS...

Try to disable SIP ALG on firewalls Do you have set up direct media path ? What phone do you use (we have a lot of issue with J1XX series)

443 is also used for presence and directory (new MT-CTI functionality)

I was just about to start playing with it. Thanks for this feedback !!

Hi guys, I forget to update this thread. We finally manage to make this work. We have to use local number (not national) in ICR instead of full international number and also prefix all DID with a '-' Thanks for your help ! Cheers

Thanks davea2 !!

The voice provider (Deutch Telecom) says that is normal behavior on all German's PRI when call are coming from analog or ISDN circuit. They say we should have the option to configure "overlap-receiving" ... I found an article on Cisco having the same issue ...

That's my question ! I've asked the customer to see if it can be changed on the voice provider level !

@TheSmash, no I only talk about incoming calls. Voice provider does not send all digits in the same time ... It seems this is how it works on german PRI @sizbut, yes this is a temp option but this doesn't solve my issue :)

Hi guys, I have a set up in Germany and we are not used to work with this :). We have some issue on incoming calls on the PRI. Some calls are not answered by the system The voice provider says that they don't send the whole number in a block. This seems to be due to the german dialing plan that...

Thanks a lot !

Hi, Does anybody have the IPOCC database dictionary/table structure ? Best regards,

yes but you have to keep it mind that call automatically loop into the task flow. We have achieve this by using a local variable that we increment each time we go into the IVR. Then we have a condition that check if the wait time is > to variable*60sec

I've heard the same rumor but nothing official

Conference control is not available in Equinox for now (it is only supported on Aura). You can configure IPO to disconnect conference when moderator leave if it helps :)

Only separate server is supported for now

My customer asked to change it to a custom value ...