Search results for query: *

It uses the IP address from the Network Element.

you would need to de-programm the trunks and the Digital Link card.

There is no extra licenses needed to move from MXe to EX. The only potential issue there might be is if your using Embedded analog that can differ.

Can I register and use SIP phones that are not Siemens made?

Looking at your explanation you got a Route in your system with Dialed Digits 7000 pointing to a specific SIP line. Create a new route pointing to the same SIP line and use the 07000 as Dialed Digits to point to it. You now have the option to remove the first digit before the number is send out.

One remark on the use of the SI tool. If you start the SI tool and select the Preform Full Install and de-select all options except Configure License and Option Configuration this will sync to the AMC and will NOT reset your system.

Firmware version on the phone.

At the point were you login a user at a phone that phone will register itself at that node. In your case a 69xx phone is trying to connect to a 7.2 version system. that will not work. Move these users over to the 8.0 system.

This might be related to the Firmware version running on the phone. Make sure you got the latest running available on MOL. (1.4.0.85)

Mitel has a video on the knowledge base on how to migrate a system and how to reverse migrate a system.

For people that have access to the Mitel Knowledge base look at HO2853 and/or HO2854

It might be the ICP/PBX settings. the IP address of the controller should be set and after that is done the controller needs a reboot before a console should connect to it.

You need first go back to default in the MSL page of your MXe server and then change to the adresses you want. There is a uide for installing the MXe server on MOL. get that as it tells you what to do.

You can't use the "normal" ARID to license a vMCD. You can use this license and add a migration to Virtual license and then it can be used for vMCD ONLY !!!!! When installing the vMCD you come across the console option to add the ARID. I've always skip that and add the ARID in the msl web...

What version of software are you running on the 3300?

What do you get when it's not correct and what type of phone?

You need to do this otherwise around. Your RFP's 32 can be upgraded to run the same software as your new RFP35. Be aware that you must NOT have any RFP31 as these will not work. Software can be downloaded from MOL.

Software version 4.x can only be reset by Mitel Support.

Do you have it working?

Try this file. This was for release 5 and is nearly the same for release 7 http://files.engineering.com/getfile.aspx?folder=8482dca7-ca48-4c56-b94a-28e377404cf4&file=IP-DECT_Labs_v5.pdfhttp://files.engineering.com/getfile.aspx?folder=8482dca7-ca48-4c56-b94a-28e377404cf4&file=IP-DECT_Labs_v5.pdf