Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Caller ID in 3300 Ring Groups

Status
Not open for further replies.

zete

Vendor
Jun 17, 2010
73
US
In a 3300 using ring groups the caller id is ONLY correct when the outside call is transferred into the ring group by the operator or from the auto attendant.
Any ideas????
Zete[dazed]
 
Thanks for your time!
When a call comes from a customer dialing 843-746-2171 (ring group) it shows 1171 on the display. When the rep picks up it only shows 1171.
If another call comes on their line - the caller ID will show the customer's number of the current call. Also the
caller ID works if the customer calls the main number. The AA or the Operator transfers those calls and the correct caller id of that customer is always shown.
These ring group members use a mix of 5220s,5215s, and 5212s. All of different types of sets work and show the same info........good or bad!
 
The software level is 12.0.3.15. The release level is 6.0 SP3.
Thanks for helping!!!
ZETE
 
This may only confuse matters more but here are my findings when I was playing with this feature

thread1329-1741974

**********************************************
What's most important is that you realise ... There is no spoon.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top