Search results for query: *

I solved this issue, this solution is posted elsewhere in a round about way.. But to be clear, here's how: CM6.3 ch system-parameters features Page 17 of 20 FEATURE-RELATED SYSTEM PARAMETERS AUTOMATIC EXCLUSION PARAMETERS...

CM 6.3 H.323 phone set deployment. I've enabled data restriction to enable call appearance privacy - which works, but when doing so the Intercom function breaks. Is there any way to have both these features work at the same time? Sceario: 15 users are bridged to 4 admins -- We want...

rejackson, I had the same issue after some rapid up/down/congested network conditions. I was able to correct it using the reset voip-dsp 1 (or 2, 3 depending on which it is). Wildcard

On the trunks in question... SIP or otherwise try adjusting the Send Diversion Header option from N to Y or reverse. Thanks, Wildcard

Is the following true? Avaya CM 5.2.1 cannot support Off PBX SIP stations and traditional phones like H323 and digital/analog on the same system. Thanks, Wildcard

I've read that the NAT should be H.323 aware as addresses are included in the body of the packet (not only the header - which is why it won't work without additional configuration effort). Search for NAT on this forum to get some further ideas on how to proceed... in theory you should be...

I don't think direct IP to IP calls will work traversing a NAT. Wildcard

When the call shuffles to direct IP to IP one of the phones can't reach the destination... Just a thought... Wildcard

I believe power is on pins 7 and 8. Wildcard

Thanks AvayaTier3. Wildcard

First thing I would do is check to see is if your telnet ports are enabled on the server. Wildcard

Probably hardware differences... It should not matter as long as its working. Wildcard

Prior to a point... then sometimes it's required after the upgrade. It does not happen automatically... BTW - it can be a lengthy painful process depending on how big your PBX is and how well you are versed on performing the updates. My stance in the real world... if it isn't broken and...

Perhaps by the display locations form and the prefix column? So... they only dial 4 digits locally? I went from 4 to 6.. I had to touch each one... Wildcard

get forced-takeover ipserver-interface all (for G650's) on the main server. Wildcard

I would think IF you have VoIP phones registering to PE you'll have split registrations. I suppose it depends on their gatekeeper list. Disable nr-registration xx (network region) on CM is handy when testing failover at locations. You could pull the LAN connections of the master servers...

status health Top right corner of the screen. Wildcard

1 and 2. Though on 2 if you have shuffling turned on it may switch to 1 and phone directly. Status the station to see. Wildcard

Thanks mikeydidit.

display system-parameters ip-options Any known consquences of enabling: Enable Voice/Network Stats? Thanks, Wildcard CM5.2.1 SP6