Many application notes talk about SIP configuration, google it and try.
https://ipofficekb.avaya.com/businesspartner/ipoffice/mergedProjects/appnotes/2023/WN-IPO111SBC101.pdf
https://ipofficekb.avaya.com/businesspartner/ipoffice/mergedProjects/appnotes/2022/A1_IPO11.pdf
Good Luck :)
Hello,
I have this message when configuring recording archiving on the secondary voicemail server.
The SE is Rls 12.0, and I don't have issues with username and password, it's the same I can access primary voicemail and primary server.
Any idea to solve this?
Hello.
I have installed the IPOSE 12.0 system on VMWare with sda hard drives, which has been working fine.
I just added a 2nd drive, (sdb, 300GB), for call recording.
After the ignition process, format the hard drive and partition, and reboot the server after the initial configuration is...
Check withholding your number on external calls.
The use of this option depends on the external line provider. Sometimes, attempting to use this feature can cause calls to fail. If this occurs, the feature should be switched off.
Procedure
Press the Features soft key if shown.
To do this...
Hi ...
When tracking the traffic on the firewall, we found that when this case happened, it reflected an invalid connection helper on port 5060.
make this port loaded ( previously unloaded), and it works well with no hanging or problems.
Thanks
Hi ,,,
if we configure DOD as follows:
--- User Rights:
9N
Dial
N
50:Main
--- ARS: 50:Main
N
Dial
Ns07946429061
1
and the DOD is still the Primary DOD, then the problem is from the telephony provider .
Thanks
Hi @braaten007: Yes, I Updated to the latest
Hi @dbb1234: Yes, I know that very well, and that is why I sought the help of you here, the best experts after I exhausted all solutions with IT guys.
Hello ...
A strange problem I face when operating J100 phones in remote locations using VPN, and VLAN, is that sometimes when a call comes into the phone, the phone stuck rings and hangs and does not disconnect until it is restarted, When this situation occurs, I see the phone on SSA is...
Unfortunately not working, out always from PRI, But I have an idea from you.
Working in this way,
--- Expansion (L)
Code: 8N
Feature: Dial
Telephone Number: 8N
Line Group Id: 9999
--- Primary shortcodes
Code: 8N
Feature: Dial
Telephone Number: 8N
Line Group Id: 50 Main
--- 50:Main Solution...
Hello ...
How can we make an Expansion Server (L) user access the analog line using 8 access code from Expansion 500v2?
I created the shortcode on ARS and it's working for any user on the Primary server, but for users on Expansion, it is always outed from PRI.
--- User Rights Solutions...
Hi aah74,
Using the "Finish" block and pressing the Radio Button " Route Call" on the DN box enter either the DN number or HG.
Thank you for the great solution. I invite you to learn to flow, it is more fun than script :).
How Can I give you the star on your solution in this new forum-style
Hi aah74,
Unlike you, I work on GUI.
I searched all the documents and found no single example either on both way
if you can point me this I will work on the script and convert it to flow and see how it works
Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.