Search results for query: *

Hi I need to integrate NEC with Opt 11 on CAS. Can nyone provide me the working settings for opt 11 and NEC . i have 2mb DTI card in opt 11. regards hd

No It is not MTNL.

Hi Please tell me how to enable Caller ID on R2Mf Trunk. Regards hd

Hi I am trying to integrate my 11c system with NEC on CAS using DTI card. When both end try to call each other we can see channels getting busy but the calls dont land on extn. Anyone having exp. on this please provide help. regards hd

Hi I am using signalling server and rls is 4.5

Hi How do we setup node password for ip phone .Please help. reg hd

yes this is new install

Hi I have CS1000s System with Calpilot 4.0 installed. The problem i am facing is that i am not able to access my voice mail. When I dial the Voice Mail CDN. IT asks for Voice Mailbox but when I enter the DN for Voice mail box it is not accepting my digits . I am getting DTMF tone and digit...

hi dlesap I have already done this but still not working. The cisco guy is saying he cannot make any config on his side. regards hd

Hi I have to integrate Nortel NRS with Cisco Call Manager conference circuit. What configuration needs to be done on NRS and Cisco end. Regards hd

Please clarify me on The NRS func of signalling server and how to config it for SIP trunks

Hi How to create SIP Trunks between two signalling servers. Whats the purpose of NRS .

Hi Poole I have one query if we can get ACD reports from M1 for inbound. Regards hdsingh

Hi I have a query . I need to provide a stanby system to my customer who has 81c system with 350 ip users and 23 e1's , 150 digital phone user and symp 5.0 server. I have two 11c cabinets with one expansion on each with golden dongle from Nortel. they have provided 8 pri cards for each...

hi john If the system is DC then should i check the power for system or go on adding the ipe shelf to the column. The nortel manual says that one ipe module needs 460 watts power. since i am adding ipe module . i think i should check the drain for system also in case of DC powered systems...

AC . I am adding Shelf

It is an IPE shelf addition and MC card install . Do tell me about power requirements for this new shelf. regards hd

Hi I am going to upgrade my 81c system with one more ipe shelf and MC card. what considerations should be kept in mind. please advice. regards hd

Hi John Thats alright but with the current set up i have connected with crossover cable to pc with lan1. Please also specify what communication takes place over lan 1 and lan 2. the ip we specify in ld 117 is for which , either lan1 or lan2.and the clan and elan ip are same in ld 117...

Hi Guys I m assigning IP address to 61c WITH PII processor. the IP i specify in ld 117 is elan IP. how it connects to clan with the ip configured. when i connect to lan 1 connector with a cross cable to my pc i dont get interface up.lan 2 is connected to lan2 with crossover cable. Please help...