Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. babajoe

    User has to push the key to get the call

    Thanks a lot DisasterMaster. That did it.
  2. babajoe

    User has to push the key to get the call

    Hi everyone, First post on Tek-tips. I have a weird problem on a Nortel 1140 (CS1k). When calling the 2nd DN on the phone, the phone rings but when the user picks up he hears a continuous tone. From the caller side it is still ringing. The user has to push the key in order to get the caller on...
  3. babajoe

    Bcm 50 intermittent caller id

    Check your GATM module. If you have more than one try re-routing the line to another GATM and check if that fixes the problem.
  4. babajoe

    7449 cordless not accessing the line

    I know, DocVic. But that is exactly my problem. I cannot change it to Appr&Ring. Is the DMC320 responsible for that or is it supposed to be like that?
  5. babajoe

    No CLID on T7316E

    I have already added another phone to the line in question and set it to appr&ring with CLID checked (the phone was on a different port) but no CLID was received.
  6. babajoe

    No CLID on T7316E

    Thanks for the suggestion Telcodog, but the settings on the BCM are OK: appr&ring and CallerID Set is checked. Cook1082: I do not get CLID even after picking up. I will check the telco section of the phone.
  7. babajoe

    Bcm 50 intermittent caller id

    I am having the same problem on BCM400 and still haven't figured out the source of the problem. Is it doing it on all the sets/lines?. It could be the GATM that is acting up. try to change the GATM and see if it fixes the problem.
  8. babajoe

    7449 cordless not accessing the line

    Hi everyone. I am having trouble making a cordless 7449 (DMC320 connected to BCM400)access the second line. The DN should access 2 lines. The problem is when the first is taken, it cannot grab the second. BCM configuration is OK as I said but the weird thing is that the DN on BCM400 is set to...
  9. babajoe

    No CLID on T7316E

    Could the GATM8 in question be the problem?
  10. babajoe

    No CLID on T7316E

    I cancelled the static time&date, but it did not solve the problem. Thanx for the tip, though.
  11. babajoe

    No CLID on T7316E

    Hi, everybody. I have a BCM400 with 8 GATM8 modules and 2 DSM+. The problem is that one T7316E doesn't receive the CLID of an incoming call. I bypassed the BCM and tested the analog line and Bell does send the CLID info. I checked the configuration on the BCM (Caller ID Set) and it is OK. The...
  12. babajoe

    BCM , DMC320 BASE STATION CONNECTION

    Here it is http://support.nortel.com/go/main.jsp?cscat=DOCDETAIL&id=858722&poid=8423

Part and Inventory Search

Back
Top