Search results for query: *

Hi to all. Below cable pin-out that working: hope this helpful. AVAYA Media Gateway console cable DB-9 F RJ45 1 6 2 3 3 2 4 4 5 5 6 NC 7 8 8 7 9 NC Nortel-Juniper cable DB-9 F RJ45 1 NC 2 3 3 6 4 7 5 4-5 6 2 7 8 8 1 9 NC Extreme cable DB-9 F DB-9 F 1...

Hi to all. I need your help: can i save G450 local running configuration ? can you send me the exact procedure ? thanks m.

Hi to all. We need to connect with some G350/G450 through console cable (RJ-45 to DB-9). I read more thread on the web..but i'm confusing. So, can anyone help us about the EXACT pinout from RJ-45 rollover to DB-9 ?? thank you in advance. m.

Hi to all. I try to install a S8300D baord (pull from other field server) on G450. Connect a laptop with cross cable to Service port + CDROM on USB1 (CM 5.2.1 DVD installation). The board reboot, GREEN LED Link = ON, but no IP address configured (192.11.13.6). Some notes: - installation DVD...

Hi to all. I try to install a S8300D borad (pull from other server) on G450. Connect a laptop with cross cable to Service port + CDROM on USB1 (CM 5.2.1 installation disk). The board reboot, GREEN LED Link = ON, but no IP address configured (192.11.13.6). Does anyone can help me ? thanks in...

Hi to all: sorry for my bad english.. In our lab we need to test same S8300C V2/V4. Trying to install a CM 4.x on a new S8300C V4 (MG G450) but doesn't install on hard disk: after telnet connection, the installation process is blocked on select partition. It seem to work only with CF 4 GB...

Hi to all. I'm using another WinXP notebook & cros sover cat5 cable to connect @ S8300 service port. No connection: ethernet link is OK / RX/TX in OFF. (check the cross cable & works fine..). Any suggestion ?? thanks in advance. m.

Hi to all. I'm using Win7 notebook & cros sover cat5 cable to connect @ service port. I try the workaround posted on Avaya Youtube video.. finger cross.

Hi to all. First, i'm apologize for my bad english. I received from our customer two S8300 board (model C V4 & D V4) that's appear broken.. I tried to insert one S8300 in our g450 slot v1 & reboot (power off/on) --> setting up the notebook (192.11.13.5) and connect to Service port: no link & no...

..of course.

Hi to all. We need to have a hw full reset for 1608 phone... Let me explain: we have changed on board EPROM & rewrite all information with another 1608 firmware information i.e. MAC Address..). Now, when try to connect the phones to our IPO v.8, the system disconnect one 1608 (URQ message...

@tlpeter thank you very much! Is the IPO on an untagged voice vlan port? --> we'll be configure Cisco port both VLAN (data & voice) Configure an untagged voice vlan on the port. nothing else. Are the phones on a tagged voice vlan port? --> ip phones are tagged voice vlan ports That is good...

@tlpeter Is the IPO on an untagged voice vlan port? --> we'll be configure Cisco port both VLAN (data & voice) Are the phones on a tagged voice vlan port? --> ip phones are tagged voice vlan ports What is providing DHCP to the phones and how do they get there vlan info? Avaya IP Office...

Thank you Matt. Cisco Catalyst Express 500 Series switches deliver best-in-class networking that is designed to meet the needs of growing businesses with up to 250 employees. This family of Layer 2-managed Fast Ethernet and Gigabit Ethernet switches offers non-blocking, wire-speed performance...

Hello. We need to configure below equipment for testing purpose: - n. 1 Avaya IP Office 500 - n. 1 Cisco switch 500 24 ports PoE + 2 ports GbEth - n. 20 Avaya IP Phone 1608 So, we'll be create below VLAN: - Default (Native) - Cisco-Guest (VLAN 3) - Cisco-Voice (VLAN 4) We'll be set ports 1-24...

Thank you for the quick reply. Can you send me more info about BCM50 release version to be used with 6120/6140 wifi phone ? I'm read about rel. 3.0 or superior...

Hi to all. I need your help to the right choice about Nortel BCM50. Does anyone experience about BCM50 & wifi phone 6140 ? Which release work better with this phones (> r 3.0) ? Need other Nortel appliance to work, except WiFi Access Point ? thanks in advance. /m.

Hi to all. I need to upgrade IP 1608 firmware to 1.3.4 on my IP Office v. 8.0. I've downloaded latest firmware (zip & tar) from Avaya support center. So, can you help me about 'step-by-step' installation procedure ? Where i need to copy this files ? on SD card ? Thank you in advance. MV.

Hello and Many thansk... Yes, we have 6140 NORTEL form 2010...we need to connect with IP Office v. 8.1: do you have any suggestion ? (i.e. firmware downgrade/upgrade) ? regards. m.

Hello to all. We try to configure some wifi phone 6140 (manufactured year 2010/2012) with IP Office rel. 8.1 & standard AP with WMM support enabled (Netgear). We updated the phone @ release 117.058 (plese note AVAYA H323 Release 3 version 117.058 allows Avaya 3641/3645/6120/6140 IP Wireless...