Hi to all.
First, i'm apologize for my bad english.
I received from our customer two S8300 board (model C V4 & D V4) that's appear broken..
I tried to insert one S8300 in our g450 slot v1 & reboot (power off/on) --> setting up the notebook (192.11.13.5) and connect to Service port: no link & no tx/rx. I suppose that ethernet circuit is damaged: any suggestion ?
I tried to insert other S8300 in our G450 slot v1 & reboot (power off/on) --> settings to the notebook (192.11.13.5) and connect to Service port: only link & no tx/rx. I tried to change some NIC paramters (speed, 802.1Q, etc..): no way!
Still, does anyone experience with other external USB CDROM than Panasonic/Addonics/TEAC ? maybe i'll be need to boot .ISO OS...
Thank you in advance.
m.
First, i'm apologize for my bad english.
I received from our customer two S8300 board (model C V4 & D V4) that's appear broken..
I tried to insert one S8300 in our g450 slot v1 & reboot (power off/on) --> setting up the notebook (192.11.13.5) and connect to Service port: no link & no tx/rx. I suppose that ethernet circuit is damaged: any suggestion ?
I tried to insert other S8300 in our G450 slot v1 & reboot (power off/on) --> settings to the notebook (192.11.13.5) and connect to Service port: only link & no tx/rx. I tried to change some NIC paramters (speed, 802.1Q, etc..): no way!
Still, does anyone experience with other external USB CDROM than Panasonic/Addonics/TEAC ? maybe i'll be need to boot .ISO OS...
Thank you in advance.
m.