Search results for query: *

Ok, the patches are loaded but as pronzi asked, have you pushed the latest firmware into the phones. Loading PEPS and patches on the PBX does not do that. You have to go to LD 32 and either manually push the new firmware into the phones or schedule it to happen automatically at a good time, like...

acewarlock is right. A standard 16 port analog line card will not send disconnect supervision. No way, no how. You need the OPS card to provide open loop disconnect towards your dictation machine. Open loop disconnect means either a momentary open in the connection or battery reversal of the...

Did you configure the DTT properties and ESN access codes in CP? DTT = Delvery To Telephone, if memory serves me there might be a DTF (Delivery To Fax) poperty also. Basically you have to tell the CP how to assemble the phone number for outdialing purposes, i.e. match your calling area dialing...

Have you peeked at the firmware of the culprit phones? Are they the same as the phones not doing this? Are they a different phase?

pronei's response is correct. OTM is rejecting it because it is validating it against the numbering plan cross checking you can set up in OTM. You can turn the validation function off completely which is what I do. It's a pain the rear.

Check the firmware and loadware of the VGMC card. It needs to be at the same release as the sig server. IP Line 4.5 since you are running Rls 4.5. If it is not correct it will boot up and register with the sig server, display F000 for a short period and then drop into Master mode (M000) I...