Search results for query: *

riscyrich, In order to packet sniff correctly just grab your laptop and install wireshark. Then have your network guys make you a "Mirror Port" on the switch that mirrors the port you want to capture traffic from and plug your laptop into that port you might also want to ask them for an IP...

As Gene stated in this post... http://tek-tips.com/viewthread.cfm?qid=1486223 CLS ICDA for internal Thanx, Aqua

The way roaming profiles work is this... under documents and settings there's a username in windows.. that houses your "My Documents" "Desktop" and other folders along with a file called NTUSER.DAT. This NTUSER.DAT is what's probably holding the information. When roaming profiles are enabled...

Anytime I try to import anything I'll first try to do an export of something that's the same type.. for instance.. if you're trying to import a 3904 try exporting one first and then just change up the fields you want. Aqua

Since you state "other sites" do any of these other sites have a sig serv? if so you can just pick one and change the roll to be your Alternate Gatekeeper and then go to all of your other sites and setup that IP in the alternate gatekeeper blanks and set them to be failsafes... we just did this...

If you'd like to flip all the phones to one SS to the other "gracefully" before yanking the power cord.. you can login the SS you want to bring down and at the oam> type "help mam" (no quotes) and you'll see disServices run that and after it's migrated all your ipsets to the other SS then yank...

We're using bluetooth headsets with 1150 on a call queue. Have you pulled the latest firmware for the 1150? Also are you hitting service key twice to get in the menus and enable the bluetooth headset then pairing it? Aqua

I'm not sure if this is the same issue you're having but I was getting the samething. What happened to me was this. When the folks that installed the Signal Server came in there was an old ITG card in our PBX. They installed a new 32 channel media card and just took the ITG off the node and...

I'm having the same issue. When I go into Dialing Options and try to select the I2050 as the TAPI device it's not listed. Thanx, Aqua

Your dsp's are also referred to as "Channels" on your Media card. These are the bottleneck of IP telephones to copper calls whether they be an analog set, a digital set, or a call to the outside world. If you can get to your pbx and look at the cards, find the loop, shelf, and card number. Do a...