Search results for query: *

Hi , i have one customer with one Avaya IPO 500V2 and need one digital extension in the security check , but this stay a 1 mille a go from the IPO , the question is , the telephone works at this distance , or need a IP Phone? thanks for your help.

But yes, this is the question : I need to connect 2 sites over internet , the 2 system have the VCM32 card and the networking license , what is the best way to make the connection , the internet connection is a DSL in boot sides with static public IP , only doing the port forwarding in the...

Some moddel in specific , actually have 2 cisco sf-300-24p but they have a lot of jitter and packet loss in internal and external calls so i decided to replace they switch´s to one more robust. Any advice ? Thanks ...

But yes , this is the question , what is the better switch to run 32 ip phones (9641g and 9650) in the IPO , any advice ??

The two systems are IP 500 V2 7.0 , the customer only want talk between extensions. Thanks...

Hi everyone , i have a customer with 2 avaya IPO in diferent office´s , they have a wireless link running to share applications on the same server , he want to connect the two IPO to make calls between they , all have the card VCM32 cards , what i need to do to make this , i read about need ip...

Hi , thanks gtucci and telcodog , the phones works now , i try to config the phone to partial DHCP and don't works , before config DHCP server in the BCM in the data services , config as IP Phones Only , and it's all , the phones works fine , now i have a little echo in the pstn lines only in...

The actual is supply from my internet router , as the DHCP server , also the BCM have the option of DHCP server , the BCM is the no router version . Thanks .

HI, this is my first installation of BCM , always i make installation of Norstar 0x32 , o.k this is the problem: The system is a BCM50 8x4x2x2 all works fine except the ip phones , the keycode is for 8 digital, 4 loop trunks, 2 analog port and 2 ip , the ip phone are a 1120E series , the BCM...

Thanks for your answers , i change the profile of the norstar , to profile 1 , the loop trunks works fine now, but the PRI line don't works , because in the harware section not appear the PRI option , to assing the card , Some idea ???

the trunks are loop , no ground trunks ,(2 pair) i make calls with the test set and works fine , and the trunks dial in dtmf , also i try put in pulse in the norstar programing and past the same. Curious no??

Hi , i have a customer with a Nortar 0x32 with a PRI lines ,now the customer wants add 2 cooper lines (Loop)i make the instalation in the dmark and programming the pool line, etc. now when i take one of this lines i have dial tone, but when i dial any digit the line continue with the dial note ...

Exactly curlycord, the line is a Analog tone from a one ATA (like Vonage)no Norstar ATA2 , and I use the slot number 3 in the 0x32 , and the system have one 12x0 , i try also in one slot of 12x0 , i can take the line , but the system no dial nothing Also i try with other cartridge of trunks...

The ATA is like a Vonage, is a regular line, when i conect a regular phone to the ATA, I can make and recieve calls fine But this ATA's i need conect to the Norstar 0x32

Yes curlycord , i test the line with a phone direct to the ATA , and i can make a recieve calls fine, but when i conect the lines at the PBX i can't dial any number , only hear the dial tone from the ATA

NO only test with a VoIP line , i test with a regular line (Telmex) and pass the same , can't dial any number , only hear the dial tone , but nothing pass

I try, install the cartridge in other slot (12x0) and pass the same , I change to pulse the trunk and works fine, Hardware problem ???

Yes, the cartridge is a LS/DS the lines asign is a 031 to 034 , i can take the line i hear the dial tone from the ATA (Voip) but i can't dial any number , the dial tone continued , like a no number dial I remplaced the trunk cartridge and try with a regular line (no VoIP) and is the same...

Hi, I have a custumer with a Norstar 0x32 with PRI lines (works fine)but now, he want to install 2 VoIP lines , in a LOOP Cartridge, the lines works fine outside of the system , but when you conect in the PBX , you can't dial any number , only hear the dial tone , i try with other conventional...

Thanks to all for your ideas , and sorry for my English, (is very bad) the question is: My client (business office)no want a all Employees stay in the phone for max 10 min in all type of calls , and he askme if the system can cut the calls after 10 min after the call start. The system are...