Search results for query: *

Thanks everyone I did resolve it. After changing my search terms I found the answer. I used FBUG following the instructions con the web page http://pbxbook.com/meridian/iniloop.html Thanks again Chris

Thank you I have looked for bent pins, I have removed all cards except for the scc and the power supply. Any ideas welcome and greatly appreciated. Chris

Hi Thank you for responding. I have reseated the daughter boards, the memory, and the dongle. I have also checked the PCMCIA cards. Same results. Any other ideas? Chris

Hi i just moved a working option 11 from to another (shipped it) and now it will not boot up. is there any way to recover form this? I have posted what i see below. The system has the PCMCIA cards with a backup, however we do not have the keys. thank you in advance for any help. Chris...

HI Yes I have PKG 263 Chris

Thank you for responding I changed my RCAP settings to match yours (posted below). There was no change I still only get a name display calling from the Nortel to the Asterisk. Chris ADAN DCH 22 CTYP TMDI CARD 02 PORT 1 DES TOASTERISK USR PRI DCHL 2 OTBF 32 PARM RS232...

Hi I have connected a Asterisk (11) to a Nortel Opt 11 Succession 3. The connect is TIE using QSIG. Calls are processing however there is no name display calling from the asterisk to the Nortel. Any help is greatly appreciated. Below is my Nortel configuration. Thank you in advance for any...

Thank you for responding. I did not get the option to change NCNA and NCRD in LD 16. so I deleted the RSB and recreated it, it did not prompt for those options. However now I have name display when Nortel calls Asterisk, on the asterisk.

Hi Thank you for the suggestion. i tried complexly outing the DCH and the first thing i tried was to put ND2 in the RCAP still the same error. Chris

Thank you for responding I get a SCH0531 error when I try to add ND2. SCH0531 Action: the RCAP entry point in ovl 16 has been answered NDS when QSUr QSIG GF are not accessible or with an inappropriate interface configured. Please can someone tell me what I have configured incorrectly? Chris

Hi A PRI is connected between a OPT 11 Succession 3 and a Asterisk. Calls pass OK between the 2 switches, however the name display does not pass through. I have used IFC = ISGF. Attached below is my configuration. Please tell me if i have the Nortel settings correct. Also i need the OPT11...

Thank you that was helpful!!!

We just had a failure of a power supply and none of my usual sources have this one. What is the difference between a NTDK70BBE5 and a NTDK70BB as I seem to be able to find those? Or is there another part number that will work? Or if anyone knows where I can get one in Salt Lake (the switch is...

Thank you yes ISDN is enabled in the CDB Yes i built tem as SIGO = STD and they otherwise work

Thank you is there any way to make message lights work without package 37 and useing ESN5?

Hi I am building a new TIE route and need to set the SIGO for the ROUT in LD 16 to ESN5. The route defaults to STD. In LD 17 is states to use ESN5 I need to set VSIG to YES but I do not get prompted for that option. The system is Succession 3.0 I am trying to use ESN5 to have message lights...

Hi Thank you very much for the responses I will look at LD 86 We are using 2250 at all offices Also yes there is 4 digit dialing over the tie lines Chris

Hi I am being asked if there is a way to forward the attendant to another office during lunch. The offices that need to be forwarded are OPT 11 v25 and OPT 11 succession 3. These would be forwarded to an office with an OPT 61. They are connected with PTI tie lines. Any suggestions would be...

That got it thank you

Thank you for the reply here is the info TN 20 0 6 9 DATE PAGE DES DES 5318 TN 020 0 06 09 TYPE 2616 CDEN 8D CUST 0 AOM 0 FDN 5444 TGAR 3 LDN NO NCOS 5 SGRP 0 RNPG 97 SCI 0 SSU 0001 LNRS 16 XLST CLS CTD FBD WTA LPR PUA MTD FNA HTA ADD HFA MWA LMPN RMMD SMWD AAD IMD XHD IRD NID...