Search results for query: *

I have a CS100M with a cassidian E911 system and ALI databse. Currently I have to use my cable records database to input my records into ALI. Is there a better way the PBX can provide me with the correct information for the ALI and Cassidian System. How about internal ESN data? Thanks

Configuring Secure Local Menu through Full DHCP Password protection is enabled during Full DHCP configuration if the SECUREMENU parameter, or the PARTSECURE parameter are present at the end of the S4 part of the Full DHCP string. If neither the SECUREMENU parameter, nor the PARTSECURE parameter...

Good Morning, I need to know what the S4 DHCp string is on the DHCP server. I am trying to set up the full dhcp securemode and and partsecure. DHCP Secure Mode The IP Phone follows the menu lock configuration received from the Full DHCP string • if SECUREMENU is present, you are prompted to...

We have found where to remove it. It was only visiable in Element manager under the ESN Data Block. GHTrout was right that is has to with Autovon. It is ols programming left over from a previous version.

I see it right after the AC1 prompt in LD 86 ESN data block.

Here is from memory. This is the ESN data print out from LD 86. AC1 9 SDGT 0 OVF SDGT 1 IMM SDGT 2 PRY SDGT 3 LOC SDGT 4 RTN SDGT 5 LOC SDGT 8 LOC SDGT 9 LOC AC2

Hello out there, I have a CS1000E that I am working on setting up BARS and the prevoius software programming is using SDGT under AC1. I need to remove these SDGT from AC1 and no where in the NTP's does it show how the remove these. Can anyone tell me how this done. Thanks

I am directly connected to J21 on the active cpu and still get the same results.

All the patches are up to date, INI'd the PBX and did reload. The 0's whould show up in groups of four. example: 0000 or 0000000000000000 but always in groups of four no matter if on the same line. How/where would check the LOF and LON and the prompt SEND OFF? Thanks

Sorry for not responding been TDY for a week. I am still having this problem, any other thoughts on this would be greatly appreciated. Thanks

No, this was going on before that. At the time I thought the DCH's where also causing this problem. Now my DCH's are good and I am left with this problem. I really do beleive it has something to with calls though. Thru-out the night it runs clean because noone is at work, but as soon as the day...

Here is a screen capture of the problem. TTY 08 SCH MTC BUG OSN 11:01 OVL111 BKGD 44 > AUD000 000000000000000000000000000000 DTC001 000000 DTC001 DTC001 000000000000 DTC001 TIM429 12:00 13/4/2012 CPU 0 AUD000 000000 DTC001 000000000000 DTC001 000000000000 DTC001 000000...

I removed the QSDI card and still have the same problem. I am at a loss.

QSDI Card is a QPC841C Ser A

Sorry for not getting back for awhile, have been on leave. Multi-user is turned on and there is only one connection to the paddle board. The rest are connected to a QSDI card.

Yes, I agree with your assessment of the CNIP after doing some reading. The TTY I am using is on computer with serial connection using Putty. This connection is also going over a Cat 5 cable about 25 Ft from a TTY Paddelboard. What is weird is that I did disconnect this cable from the...

Thanks, but what am I looking for as far as health. I know the higher the health number the better. I stat the health and everything looks good. I do however see a CNIP 0 9 1 disabled and there is no pysical port for it and it will not enable because of no port. This may be the problem, but how...

I checked and no Traffic reports are selected or turned on for any TTY's

Hello All, I have allot of "000000" output to my TTY's at random. This seems to be more prevelant as the day goes on as calls increase. I already disconnected all my TTY's one at a time to see if was a TTY issue and it's not. I suspect something with CNi or 3PE since in LD 135 it has OOS...

I do this all time, there are NXX's in your local NPA that will be long distance. To solve this use your DMI table entry that will add 1NPA. Then Program an RLI to route to your long distance trunk with the DMI entry programmed. The end user will not even know he is dialing long distance.