Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. paz8473

    RAM not showing in Vista

    Hey Thanks everyone, I guess I have all the info I need here, I do have Vista Ultimate so I just need to figure how to go from the 32 bit to 64 bit version.
  2. paz8473

    RAM not showing in Vista

    But doesn't Vista Ultimate 32 bit version support up to 128GB?
  3. paz8473

    RAM not showing in Vista

    I have installed 8GB of DDR2 RAM in a system I just built, the motherboard is XFX nForce 680iLT, the manual says it supports 8GB of RAM and it shows up during POST but when Vista Ultimate loads and the welcome center pops up it's only showing 2.25 GB of RAM, I ran the diagnostics test on the...
  4. paz8473

    Switched HDD now XP won't load.

    Everything is working now.
  5. paz8473

    Switched HDD now XP won't load.

    Actually the HDD I'm using is fairly new also with a fresh install of XP, are you saying that windows has itself configured for the PC it was originally installed on and does not recognize the new system? If that's the case I will probably just swap drives back over and leave things as they...
  6. paz8473

    Switched HDD now XP won't load.

    I recently replaced the motherboard in one of my PC's, everything went well and the system started up fine, since the new set up is better than the PC I use for music projects I decided to swap the hard drives and use the updated system with my music programs. All I did was swap the drives, now...
  7. paz8473

    Win XP service pack 2

    We actually use a router to share the same DSL modem, I'm pretty sure SP2 changed the settings on my PC but I don't know what it changed to cause this problem, how can I check the items that you mentioned if I decide to try to install SP2 again?
  8. paz8473

    Win XP service pack 2

    I downloaded sp2 and installed it on my system, then I couldn't sign on to the internet, I turned off the firewall and checked all my internet settings but still couldn't get a connection, my wife's computer is connected to the same DSL modem and I could still sign on just fine with her machine...
  9. paz8473

    Drive not ready-System halted

    Drive not ready-System halted This is all I get when We try to boot up my fiance's computer, it was fine yesterday, the machine in question is a Compaq 5000 series running win XP home, 1.4ghz p4. I have switched the CMOS battery with one from another PC but this didn't help, it will boot to...
  10. paz8473

    Agobot.6.H Virus

    Turning off system restore and scanning seems to have done the trick, Thanks! Paz
  11. paz8473

    Agobot.6.H Virus

    Yes, I have rebooted and rescanned, but I will try it again right now just to be sure.
  12. paz8473

    Agobot.6.H Virus

    I use AVG virus software, it located a virus a while back and informed me that it had been removed, but ever since then I get a popup message when my PC sits idle for a few minutes, the message is as follows: Virus identified worm/ Agobot.6.H is found in system file C:/System volume...
  13. paz8473

    Opencomm-couldn't open port message

    Well, I have a much bigger problem now, I was messing around with the restore disc and it gave the option to restore Win98 without reformatting the HD, I went for it and now I'm at a dead end because I don't have the key code to restart windows, anyone know how to bypass this, just in case my...
  14. paz8473

    Opencomm-couldn't open port message

    I don't think the modem is the one that came with the machine, he said he installed a new modem, I have the disc and have already tried to re-install it from scratch, I get the same error about verifying the interupt for the port. I took a modem from another machine and installed it into this...
  15. paz8473

    Opencomm-couldn't open port message

    Some more information to add in regards to the shutdown problem, when I tell it to shutdown, the screen goes black, it beeps 3 times and begins the bootup process.
  16. paz8473

    Opencomm-couldn't open port message

    I have discovered another puzzling problem, when I go into the start menu and tell the computer to 'Shutdown' it just restarts, every time, what's up with that? The only way I have found to shut the machine off is to push the power button, of course it doesn't go through the shutdown procedure...
  17. paz8473

    Opencomm-couldn't open port message

    The modem is on COM 1, when I click the 'more info' button, that is when I am getting the message I listed above that says: "Modem is not responding, verify that the interupt for the port is properly set", when I click 'OK' the following window show the following info: Port: 1...
  18. paz8473

    Opencomm-couldn't open port message

    Now we're getting somewhere, I'm getting a different error now, it says the modem failed to respond, and I need to verify the interupt for the port is set properly, how do I do that?
  19. paz8473

    Opencomm-couldn't open port message

    Yep, Delete worked and I will try using the MSCONFIG idea to track something down. Thanks for the response Matt.
  20. paz8473

    Opencomm-couldn't open port message

    Friend bought computer from his friend mainly for internet use, everything is working fine. Computer in question is an Emachine, running Windows '98. Friends woman did something that caused computer to no longer sign on to internet. Friend who knows nothing about computers bravely attempts to...

Part and Inventory Search

Back
Top