Recent content by Wibbers

Click the Configure Server link. Then go through all the options to configure manually. Then choose the options on the left. DO NOT CHANGE OR SAVE, just view.

Hi Using extension 1234 as an example You will need to run the command "remove off-pbx-telphone station-mapping 1234"

I can tell you this you can make the kickstart file as normal and drop it into the redhat iso ( had to put it in root and /isolinux, don't ask me why) then run command linux ks=cdrom:/ks.cfg Whilst this worked for a Vm setup it did not for the new G6 Prolient servers. Don't know why this is but...

If you have a licence error I suggest you intercange back to the main. Browser should be ok then.

yes this will work.

Is this an 87xx? They have a third controller IP address try that.

Have you tried dialling the number directly to see if the call routes? If it doesn't, change the cor to one you know works. Also what is the full DDI of the missed call is it in +81 format for example or 0081?

Listen mate we all just read manuals to fix problems and build up knowledge as we go. Everything you would be taught on a course is available in Docs from avaya support site. ..and if youre not a fan of the Avaya culture I suggest you go and get a job working on Cisco Call Mangler (yes I did...

Tried the above command and it replies with IP address xxx.xxx.xxx.xxx already defined on the interface Is there somewhere else I need to disable first? Thanks Mitch

Have you got the latest firmware or downgraded to a older one. Try until you find a working one you're satisfied with.

At a guess surely the power supply went down and caused the IPSI to go down?

G700 or G350? Try set interface mgp

Have you set the daylight/bst saving rule and on the location page on the switch?

MT is a maintenance alarm. Did you delete the messages before you removed the subscribers. You will need to stop and restart the Message service, as with most VM errors.

What is at 192.168.35.2? Could that be your local voip?