G450 IP Address Change

[Spudmoooo]

Hi,

What is the command to change the IP address on a G450 gateway ?

 

[Mitch672]

interface vlan 1"
"ip address x.x.x.x y.y.y.y" (x.x.x.x is the IP, y.y.y.y is the subnet mask)

and don't forget:
"ip default-gateway z.z.z.z"

then

"copy running-config startup-config"

"reset"



Mitch

AVAYA Certified Expert

 

[Wibbers]

Tried the above command and it replies with

IP address xxx.xxx.xxx.xxx already defined on the interface

Is there somewhere else I need to disable first?

Thanks Mitch

 

[Mitch672]

try "no default-gateway", then "interface vlan 1", then "no ip address", then start the above commands. You need to remove the old IP before you can put in the new IP information. You also need to reboot ("reset chassis") most likely, to make it work. Do that after the "copy"



Mitch

AVAYA Certified Expert