Recent content by Spekkert

OK looks like it is a problem with the stun server i used as peter suggested. I changed it to counterpath and everything is working again. The stun server from counterpath comes back with the settings i had earlier with the other stun server. Anyone got an why this went wrong al of a sudden?

ok the Phone worked for a while, but all of a sudden it stopped working. Is was registered but no audio anymore... I rebooted the Phone, but that didn't help. reboot ipo en stun came back with full blocking firewall. Nothing worked anymore, so changed it manually to the settings that worked...

Ok, the stun is working and the sip trunk is up to. It took some time for stun to work, like almost 10 minutes. Is this normal? And there is no way to do this without STUN?

Ok, tried the stun server, but as soon as i enable the stun option my sip trunk goes down... Do I have to use the Stun server option... With mitel and panasonic this is way easier... or is it just me...

I havent tried stun yet. Peter which stun server do you use? HSM, for the watchguard config, you only use the SNAT port forwarding or is there something else that you change in the watchguard?

Ok, a changed the policy to this: udp 1719 TCP 1800 Rtp port UDP 5005 Also the puplic ip is pingable. Firmware ip office 8.1.69 with the correct firmware in 9608 Stil the same problem...

Peter, i added the port in the policy. BUt there is no difference. I dont see anything being blocked in the firewall..

I know i could use a site to site but this is just for testing. We use the watchguard almost evry time with a ip office install. So i would like to know if this works with the remote worker solution. So HSM did you get this to work? Peter, the phone tries to register and switches between...

I just use packet filtering, and the other end is also a watchguard XTM. You have this working? Just with forwrding the ports with SNAT?

Hi Guys, im having trouble to get the remote worker phone solution to work with watchguard XTM series. Has anybody got this to work? Or is this a device thats on the list that do not work? Thanks!

Tlpeter, what is your acl and port forwarding setup for sip trunking on a cisco 88x. Do you forward al the rtp ports as well? If so i am currious how you do this. Also do you use these for remote extentions? Gr Spekkert

Hi Kierso, I don't have an answer to yout question but i am interested in how you got the outlook working on the terminal server. Can you explain how you did this? Thanks! Gr Spekkert

Thanks!

OK thanks, one last question, do i have to update the software off the handset and the DECT system? I see that there are files included on the admin cd.

Hi Guys, I have a customer that needs to upgrade to version 8.x. It's a ip500v1 on software 4.1. They also have the old ip DECT from DETEWE. My question is will this give me problems with the upgrade? Thanks again! Gr