Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by NorstarTechChris

  1. NorstarTechChris

    F4 external transfer dialtone sounds like disconnected

    We Have Set This Up On A BCM 400 Call Come Into The AA You Dial 4 To Go To The Remote Office The System Will Dial 8123 ( Use Line Pool C ) Set Line Pool C If You Get 8123 Strip 4 Replace With Number Dial Out Number. ISDN Has The Most Control Of This Divert. A-log Line Can Lockup Chris
  2. NorstarTechChris

    Compact PW Reset

    Hi Dave Did You Get The Fast Rad Working Chris
  3. NorstarTechChris

    What is StarTalk?

    Dave Have Sent You The Manual Chris
  4. NorstarTechChris

    RAD First Time Set up

    File Sent
  5. NorstarTechChris

    DR5 MICS Not Holding Programming

    Have A New Capacitor Fitted In The Unit This Is How We Fix The Old 6-16 Units
  6. NorstarTechChris

    RAD First Time Set up

    Email Me Your Address Will Send You The Manual Chris
  7. NorstarTechChris

    Norstar Realtime 3.1 ACD / Call Logger Password

    Have found The Manual In Back Of Workshop
  8. NorstarTechChris

    Norstar Realtime 3.1 ACD / Call Logger Password

    Hi I Have A Norstar Realtime 3.1 ACD Call Logger Running On A Windows 95 PC Need The Default Login User Name __________ Default Password __________ User Name / Password File Location On The PC This Is A Bit Old ! But It Works. Fitted On A Norstar 8/24 Hope You Can Help Chris
  9. NorstarTechChris

    RAD Remote Access Device Issue

    Hi WDY Have You Fixed The Remote Access Chris
  10. NorstarTechChris

    RAD Remote Access Device Issue

    As All The Site Have A Cisco Router On Site You Can Use The RS232 Interface To Log Into The Rad. Put A Network RS232 ADP On The Data HUB On Site And Telnet Into The Rad Units. Put A Lead From The Main Data Server To The Rad Unit VNC The Rad Units. We Do This With Option 11 Site On Some Big...
  11. NorstarTechChris

    RAD Remote Access Device Issue

    This Is A Speed Or Mux Or Protocol Fault Just As A Test Put A Modem On The RAD Set The Link Speed To 300 Then Test 1200 Then test Up To 9600 This Works On Nortel Option 11 System We Run The Remote Modems At 1200 To Stop The Data Faults Chris
  12. NorstarTechChris

    RAD Remote Access Device Issue

    This Looks Like An Inter-Network MUX Fault If The Networks See This Call As A Voice Call. It Will Be Compressed By The Network. As This Is On All 18 Sites Can You Talk To Other Modems On The Remote Site ? In The Same Way IE Dial Up Chris
  13. NorstarTechChris

    RAD Remote Access Device Issue

    Can You Use The Link To Send Data With Modems. I Can See You Have Made It Work With A Direct Line. As It Works Over The Voip Link. From What I Can Gather The Problem Come When you Come In On The ISDN ( Into The Option 11c ) Then Go On To The Voip Link & Into the Norstar. Just Needed To Test...
  14. NorstarTechChris

    RAD Remote Access Device Issue

    You Have Proved You Can Dial Into The System Over The Rad. Wire An ATA To The Norstar System. IE: Extn 4912 Norstar Site Use One Of The Copper Pots Line To Dial Out With Your Laptop PC Dial XXXXX XX4912 ( Public Network Line ) You Will Be Routed Over The Option 11c PBX. Over The Tye Line (...
  15. NorstarTechChris

    Hunt Group Question

    Have Set This Up On A BCM 50 Set All Call To Go To Her Phone ( V-Mail Will Work Ok ) FWD All Calls To Spare Phone Set Key On Her Phone To Monitor Spare Phone This Works OK. The Voice Mail Will Work As Well Chris

Part and Inventory Search

Back
Top