Recent content by new2nortel2

Hi all, We have an Option 81 v 4.x. We have comprehensive maintenance on the system and I'd like to gauge how long I can reasonably renew on the maintenance contract for this system. I understand that Avaya has announce of end support for this system but I can't find the official announcement...

Thank you for the help, much appreciated. Will this work also for active calls on digital cards, analog cards? To see how loaded a shelf or card is?

Hi, How can I check the active calls/channels on PRI spans? Thank you! new2nortel2

thank you!

... nevermind ... got it worked out - thank you

Hi, There is a stand alone WXP PC used as a terminal connected to an Option 81 used to access the system for MAC work. Putty is used via Rlogin... the window is normally left opened and the session output is used for monitoring of the system's activity including error messages and verification...

thank you for the feedback!

got it... thanks again!

10-4, just curious - is the programming on the DMS/SL100 similar to the Meridian? LDS, DN, TN etc...

thank you!

Hi, Just wondering if the Option 81 has the capability of sending test tone on a station port (analog or digital) that could be identified/located using an amplifying probe. Thank you!

thank you for your quick replies!! it appears to have been the controller... it was 01... went to ld 32 and disabled controller and super loop and reanbled and all the cards came back up... Thank you again!!!! btw... yes single loop shelf 12-0...

option 81 with 2 cabinets... the unit affected is a shelf on the right cabinet (processor 0)... only super loop 12 has a problem (all the cards on shelf '12' are alarm except 2 of them) ...

Hi gents, Have all but 2 digital cards on Super Loop 12 in alarm. Not well versed, but went to LD 32 .ENLL 12 and nothing. Please advise. Thank you!

thank you all for your input!!! very much appreciated...