how to check active calls on PRI's 2

[new2nortel2]

Hi,

How can I check the active calls/channels on PRI spans?

Thank you!

new2nortel2

 

[LittleMaster]

LD 60
stat X (X loop no of PRI)

this will show all the 30 channels of PRI. BUSY will be shown against the busy channels. free channels will show IDLE.

 

[LittleMaster]

then for checking the calling parties details on a particular channel ,go to.
LD 80
TRAD 2 3 (here 2 is loop number and 3 is channel number)...

 

[KCFLHRC]

Or 23 channels if in the U.S.

 

[LittleMaster]

yeah KCFLHRC,,, thanks for the additional info

 

[new2nortel2]

Thank you for the help, much appreciated. Will this work also for active calls on digital cards, analog cards? To see how loaded a shelf or card is?

 

[KCFLHRC]

Sure, you can stat a whole card or loop and see how many are busy. Do this in LD 32.

 

[StanleySteamer]

It is also useful in LD 80 to TRAC 0 ACOD (customer number followed by access code of the route).
So you can see the status of all the channels in the route with one command.

 

[Firebird Scrambler]

If you are in the UK, then you might want to check in LD 75 for any DASS and DPNSS links.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley