Recent content by Nazule

Thanks guys, I have looked around at replacing the part and it seems possible so long as I can find my soldering iron. $14.99 for the part + shipping seems worth it to me. The worse thing that could happen is I screw up and end up having to buy a full LCD. Brett

I have a laptop with a 17" LCD monitor that is starting to "darken" in one region. The left 1/3 of the display is slightly darker than the rest of the screen, this is more noticeable if you are on plain white screens etc. My question is: Can this be fixed or am I looking at purchasing a...

I am having some problems on a DELL inspiron 9400 series laptop running an ATI X1400 video card. The problem only occurs in games and that leads me to believe there are some conflicts between what the card wants to do and what the games want to do. The error can be slight (game crashes) to...

Being a technician I normally believe the end user should not play at programming however if a customer wants the access and is fully aware of the problems they could cause then I have no problem helping them learn it and I have no issue sharing information with them. Most vendors make most of...

If you have 128k of bandwidth and your QOS is set to BB (best bandwidth G7.29) you should be able to run up to 9 calls. 8k + overhead = about 13k into 128k.

I'm not sure 100% but I think you have to remove the SFA from the CLS. If I understand it correctly when the second set forwards the SFA stops it from retaining the original DN. I could be wrong here so please anyone clarify. If that is correct then when the call hits the mail it does not...

This on a DID or is he hitting Mermail/callpilot and entering the extension of the user?

We use pauses to allow access to paging services etc. It uses * for 1.5 second pause. The users get a tone back where they should enter their auth code so you might go with 9*1-xxx-xxx-xxxx**authcode. If that doesn't work I'm out of ideas.

If the auth codes are on the PBX change the SCL NCOS level to a level that does not require the auth codes. If they are carrier based it should simply be a matter of putting in the correct pause length and the authcode. Please confirm where the auth codes are. thanks

Exactly, From their phone they hit SCU key and lets say it is entry 20 they press 20. The scc lets you program the numbers in the list. SCU's can only use the list not make entries.j You can also program the numbers directly in the PBX in LD 18 but I only recommend doing that on the System...

In Canada Anixter provided our company with a Demo unit for 3 weeks to try it out. We liked it for its durability and range in a powerhouse environment. It also has an external antenna if you need more range, more expensive but the vibration mode really helps when you are in a noisy...

For the I2002, I2004's we use full DHCP and a virtual subnet for the phones. The PC's resolve normally on their subnet. We config to auto negotiate as well and all has worked fine for both the sets and the PC's. FYI if you go with any I1140e sets and set to auto negotiate you will have to...

I could be wrong here but I think he just wants to change the outbound digit display not change the outbound call to a specific number. So route #1 Callers show as npa nxx xxxx & route #2 Callers show as npa nxx yyyy Correct me if I am wrong but the DMI would strip the digits dialed and...

We have all second gen and have had a few of those issues as well. My co-worker is keeping tabs on it to keep our vendor in the loop.

Only the 1140 has bluetooth in it. You have to have the bluetooth function patched as well. It may be standard now but we had to upgrade our firmware to make it work. 1120's are being considered for bluetooth but I have no idea when.