Recent content by mheroy

I also have this problem: <ALLOP; ALARM LOG IDENTITY: PNOC-EDC VERSION: CXP1010101/2/BC12SP6/R3B DATE: 08JAN10 TIME: 10:13:31 CLASS: 3 278 CIL DATA LOST FOR ONE OR MORE OUTPUT UNITS DATE TIME ALP NOIF UNIT EQU INF1 08JAN10 09:25:36 2 2 CLOP...

good day, I ever my TeleAudit program does not run as it is supposed to be,can I reinstall its driver? thanks

Hi All, Can somebody teach me on how to reset this fault? "CIL,Faulty connection to nui port". Thanks

the destination address of the packet request is the ip address of the elu32 board.

I already changed the status from passive to active.

how can I change the status of the service state from passive to active?...

how will I do wireshark trace?

I have connected the IP Phone directly to the IP Network,still the Phone wont update...

This is the configuration file from the phone. Configuration file [System] System=BP-R15 OverLap=YES RRQTtl=600 GatekeeperDiscovery=NO AdminPasswd=RbdbSdc9c [Software] HardwareRev=P1* BootFile=/dbc42201/d4-boot_R3D.dat BootVersion=R3D ApplicationFile=/dbc42201/d4-applic_R3H.dat...

Every time I reboot the IP Phone, it wont upload. This is the configuration file I am trying to upload in the IP Phone: [System] ;-------------------------- ; File: d4-config.txt ; Product id and version: CAA 158 0019 R5M ; Release date: 2007-08-15 ;------------------------- ; The system...

this is the config file. every time i reboot the phone, it wont update...http://localhost/dbc44x01/d4-config.txt

I can view the configuration file thru the web address http://localhost/dbc44x01/d4-config.txt. I used a straight thru cable in tandem with the IP Phone. I assigned the the PC's IP address as the SW server address of the IP phone. Still the IP phone wont update.

I have set-up the BMS server, but the IP Phone cannot detect the SW SErver,which is in tandem with the IP Phone.What seems to be the problem?..

Can I load the new configuration file directly to the phone?...

Thanks!! We have an IP network here, and I have a BMS Software.Where will I load it?will I load it in our server?What web server will I be needing? mheroy