Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dialog 4422 IP Phone on MD110 Configuration 2

Status
Not open for further replies.

mheroy

Technical User
Jul 23, 2008
27
PH
Hi All,

I am installing a dialog 4422 IP Phone in a MD110 BC12/SP6. I got two(2) ELU Boards, 10 IP-extension licences, 3 VOIP-ETH-Interface.the Dialog 4422 is configured to BP-R15,how can I configure it to MD110?Any helpful configuration notes on how to initiate hte installation?

thanks in advance,
mheroy
 
I already changed the status from passive to active.
 

Wireshark - down load and install on laptop. Plug DHCP set laptop and phone into a hub or switch mirror port, start Wireshark, boot the phone. Check for http packets in Wireshark and this gives you the IIS address and path the phone is trying to get to and will tell you if you have the correct filepath/IIS server address.

best parnum
 
the destination address of the packet request is the ip address of the elu32 board.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top