Recent content by martinduchesneau

No password seems to have corrected the issue. Removed them a while back and no problems since, just confirmed with the customer. Hope it can help someone else ;)

And how would this translate in the regular login procedure? Pressing "more" on the right softkey; Selecting "connexion" from the menu (containing this only item); Entering "xxx*lll" where xxx is the user DN and lll it's password; In a situation with no password: 123* ? Or just 123 ? So...

... Assuming the system will be limited too by this feature and won't find some funky bypass to logout users. I'll keep you informed

Just had a brainfart...tell me what you think of this: User cannot login or out when there is no password set under "User->Telephony->Supervisor settings". Would removing all passwords from this field resolve the issue of phones logging out by removing the ability to do so? Thank you

Pepp77, are you talking about the users randomly login out problem, or the phones unsubscribing problem? I was told there were some issues with the "Provisionning" method, but the advantages were by far greater than an "unprovisionned" installation in my opinion. It's really getting the user...

Hum... I also have this problem at a customer's site... however, no 3740 IP Dect phones are in any of the huntgroups :s Customer has a mix of standard and compact base stations. Sometimes they de-register themselves compeltely, sometimes the user is only logged out and has to signin again...

Nope, haven't tried that, what would the uncd fwd be like? A hook flash or regular transfer? Please give details Thank you

Hi, I'm running in circles here trying to make an auto-attendant transfert to an external number using only one POTS line. I've read posts of people finally managing to make it work, but their solutions don't work on my setup. I'm setup in Canada, so no offense to participants from other...

Yeah...that's what the network tech said, and I'm not able to confirm or not We've tried with a brand-new-straight-out-of-the-box telephone of the same type and it cannot either. So we've eliminated the possibility of residual parameters stuck in the flashrom. Can anyone tell me how the switch...

No, communications and DHCP assignment between a PC and the IPO are fine, I can ping, access Manager, web interface and all from a PC on the same switch, I can even ping the IP Phones, sometimes (seems to stop functionning after a while). The network tech has found some kind of...

If I connect either a 9641 or 9621 phone directly to the IP Office 500 v2 (8.1.56) through a PoE injector, they both boot fine and load their config + user data. However, as soon as I connect them through a PoE switch (no config in the switch) I get a HTTP error of the type HTTP...

Hum...doesn't look good... Anyone ever tried replacing the SSD with a regular SATA drive, installing it externally?

Hum, yeah tlpeter, But as mentionned, I already tried to "upgrade" from a usb device plugged in the front ports, but during the install process it reports a write/read error on drive and stops... so that's a no-go.

We are facing a critical error while booting the VM Pro UC Module installed in our lab for experimentation purposes. It was updated correctly and ran for over 3 months on version 8.1.90-6. The IP Office also runs on 8.1 (52).For some obscur reason tough, last time we tried logging in to make...

Anyone knows where to get french user manuals in pdf format for any and all IP Office 500v2 applications and devices? Something in the line of a french www ipofficeinfo com would be awesome! Thanks