Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by L33tlucid

  1. L33tlucid

    How to group an emergency number to conference in multiple telephones

    Very good suggestion, but we don't have change system-parameters special applications as a valid command. Only thing that looks close enough is features, but couldn't locate it in that menu. The display system-parameters special applications is the only thing I see and it shows SA8893 set to n.
  2. L33tlucid

    How to group an emergency number to conference in multiple telephones

    Alright. We don't have that special application active on our switch. Thank you for the suggestion though.
  3. L33tlucid

    How to group an emergency number to conference in multiple telephones

    Hello! I'm looking for some help on the best way to do this. We have an internal emergency number that, when dialed, rings on two telephones via a bridged connection. When this happens, only one of the extensions is able to pick up and it immediately stops the ringing on the...
  4. L33tlucid

    TN722B and TN464F Keep going out of service

    There is one, but we don't have access to it or any knowledge of it. It belongs to our local Telco, and they don't want us touching their stuff. On that note, good news is long distance came back randomly. I was able to trace out to the T1 card and noticed it flickering sporadically so I put...
  5. L33tlucid

    TN722B and TN464F Keep going out of service

    I unfortunately don't have access to it as it is the local Telco's equipment. Also, update 2: On port 01B1813, it is constantly connected from the VAL announcements board and the IPSI. I'm not sure if this is hanging the card up for any reason or if this is normal behavior. I will...
  6. L33tlucid

    TN722B and TN464F Keep going out of service

    Update: Now the CSU reads good on both ends but it is still showing Out-of-service.
  7. L33tlucid

    TN722B and TN464F Keep going out of service

    Hello, I've run into an issue with my telephone switch. I have an Avaya S8170 running CMM and our long distance keeps going out-of-service lately. It started a month or so back and just seemed to fix itself, but more recently it hasn't come back. The way it's setup is its coming from...
  8. L33tlucid

    Adding a brand new port network to an S8710

    Hello Teks! I am in the process of trying to add a 4th port network to our S8710. I have a TN570D in carrier 03A11 with a 300A module connected to it going to another building over singlemode. I then have another TN570D/300A in the new carrier(we'll call it 04A13) in the other...
  9. L33tlucid

    Avaya S8710 and Siemens Hipath integration

    thank you very much for the reply. You did a phenominal job explaining. i understood even though i dont know siemens language. The issue is that my avaya switch is expecting 7 digits and its my understanding that the siemens system can only understand 4 digit extensions.
  10. L33tlucid

    Avaya S8710 and Siemens Hipath integration

    I am having an issue with the integration of a siemens telephone switch with our Avaya S8710. The issue we are having, is that a group of people, behind the siemens system, is only able to dial our 7 digit extensions using a FAC that allows them to dial out of the siemens system. This is a...
  11. L33tlucid

    Avaya S8710 Dial plan programming help

    The issue isnt getting to the siemens system from the avaya switch, its coming from the siemens system to the avaya switch using only 4 digit extensions when the rest of the facility is on a 7 digit extension dial plan.
  12. L33tlucid

    Avaya S8710 Dial plan programming help

    I am having an issue with the integration of a siemens telephone switch with our Avaya S8710. The issue we are having, is that a group of people, behind the siemens system, is only able to dial our 7 digit extensions using a FAC that allows them to dial out of the siemens system. This is a...
  13. L33tlucid

    Class of Restrictions and Call Forwarding

    I am trying to get a customer's telephone number forwarded. The issue i am having is that the number he would like to forward to is a long distance number and his telephone number has a class of restriction associated with it that requires an authorization code in order to dial long distance...
  14. L33tlucid

    ERS-8610 GIG Blade port losing connectivity

    I tried changing it to Gig/Full manually and I got this error: "rcPortAdminSpeed.215: Cannot change the port speed on this type of port." Any ideas?
  15. L33tlucid

    Blocking a MAC Address through my ITN

    Hello, I need some help blocking (black listing) a MAC Address on my Network. I have an ITN with multiple switches branched off of it. I do not want to block the MAC Address on one single switch, but on my entire network. Will GLobalMacFiltering through Device Manager on my ITN do this for...

Part and Inventory Search

Back
Top