Recent content by Kn1ght

thanks man, had to set up a hurricane hotline and quick, thanks again for the quick response!!

vmpro

Hey everyone, Im trying to set up a "bulletin board" voicemail box to just play a message without leaving them an opportunity to leave a message....any direction? IP 500 4.1.15 many thanks

How about bridged appearances??

Must use class of service "Bulletin board", in my system the cos = 10, but you can use the pulldown menu under edit local subscriber to find yours... Edit Local Subscriber -------------------------------------------------------------------------------- BASIC INFORMATION * (Required Fields)...

Go to Edit Local Subscriber MAILBOX FEATURES VoiceMail Enabled yes no VoiceMail Enabled: Specify whether the subscriber can receive messages from other subscribers, email messages (if enabled), and call-answer messages: Select yes to allow the subscriber to create, forward, and...

You can try un-plugging the 9620's - press star when indicated enter code = craft press # scroll down to clear the set should reboot itself and find DHCP server log phone in with extn enter then password enter hope it helps

You can try un-plugging the 9620's - press star when indicated enter code = craft press # scroll down to clear the set should reboot itself and find DHCP server log phone in with extn enter then password enter hope it helps

Good Morning everyone, IP Office 412 running version 3.2 (17) Appx 20 users with 4612/4624 IP phones I encountered some issues at this customer’s site that I could not figure out. I believe the trouble is with IPO and also their TFTP server. I noticed that IPO Manager was trying to download...

Do you have a suggestion as to what type of PRI card I should order? I really appreciate your insight :)

I do believe it is an alchemy, unfortunately the card is still at the site, we had to put the old module back in, but here is the info that I wrote down concerning the card, PRIT1X PCS02, does this mean anything to you? Maybe the PCS02 is the version?

Hello all, attempted an upgrade from 2.1 to 4.0, went through proper stages on the upgrade and all seemed well...that is until I took the PRI card from the old module and put it in the new one. It simply kept rebooting itself over and over. Took the card out and it worked properly, put it in...

thanks fellas, disp ip-serv worked showed the port, I input into ASA and connected properly :)

Good Afternoon everyone, I have having some trouble getting a clients ASA to connect to the definity. The IP address was wrong and was pointing her to her sun systems. I did a list node-names from the Definity and found the correct IP address, however the port information is incorrect. How...

To save a copy of the Voicemail Pro configuration: Go to the file drop down – choose Import or Export: Click on the Export call flows radio button – Click Next Click on the Browse Button Browse to where you want to save the file and name it – Click Open Click Next Click Finish – Then...