Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASA not connecting to Definity g3v11

Status
Not open for further replies.

Kn1ght

MIS
May 4, 2007
23
US
Good Afternoon everyone,

I have having some trouble getting a clients ASA to connect to the definity. The IP address was wrong and was pointing her to her sun systems. I did a list node-names from the Definity and found the correct IP address, however the port information is incorrect. How do I find out which port to use? Is it always 23?
 
do a " display ip-services " on the command line. Look in the port column for the port information on the clan you have enabled for service type "SAT"

Thanks,

Wildcard
 
display ip-service" to find what port was setup. It wont be port 23.

-CL
 
thanks fellas, disp ip-serv worked showed the port, I input into ASA and connected properly :)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top