Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by dgpcp

  1. dgpcp

    Received Digits on DIDs has to start with 1??

    Interesting. Deleting Dest Code 4(dot) resulted in no ill effects. Since these all go to the same route, interestingly, it turns out that dialing 2,3, (not 4 anymore) 5,6,7, or 8 + any digit + normal dialing works, although i have no idea why he set it up that way. Weird.
  2. dgpcp

    Received Digits on DIDs has to start with 1??

    Okay, i've found what's going on but i have a follow-up question. Our installer set up destination codes for 2-8. the one for 9 is what lets us call out by dialing 9, right? But what are the rest for? If I just pick up the phone and dial a 7-digit number in our area code starting with a 4 or 7...
  3. dgpcp

    Received Digits on DIDs has to start with 1??

    Hi, We have a PRI set up on our MICS (6.1 software), the received digit length is 4, all the ones we got before happened to "start" with 1 (e.g. NPA-NXX-1234) but now we have been assigned additional DIDs we want to use. We have no choice from our provider in selecting what digit they should...
  4. dgpcp

    T7316e Need to call-in as adminstrator, need ascii codes

    If you need to enforce changed passwords every two weeks, why not just set in Class of Service, Password Expiry to 14 days? Why delete mailboxes and make everybody record their name again? People would also lose any settings they've personalized, as well as their greetings. I think the approach...
  5. dgpcp

    Argh! Red flashing light on 0x16 expansion unit.

    Hmm... The power cable on this particular unit is permanently attached. I'll try cleaning the fiber cable, and make sure I insert it right, when i get back (I don't have a spare). For now I just punched the phones from the expansion onto the main unit instead* and used "change DNs" (grumble...
  6. dgpcp

    Argh! Red flashing light on 0x16 expansion unit.

    I've just moved my MICS to a different office. When I connect power to the 0x16 fiber expansion unit (think it's a NTBB41), the red light on the unit flashes (the light is next to a wavy line symbol like this: ~ ), and phones connected to it also have their message waiting light flashing faintly...
  7. dgpcp

    What improvements are in the 7.0 or 7.1 software (MICS)?

    Compared to the 6.1 software, what is gained by having the 7.1 software? There is a FAQ about this (http://www.tek-tips.com/faqs.cfm?fid=5388 ) but it hasn't been updated since '05 and only goes as far as 6.1. Thanks, -Dan
  8. dgpcp

    NORSTAR Modular ICS Plus

    Are you positive that it's VGA and not a serial port? Count the pins, or try gently to plug in a VGA cable to be sure. If you confirm it to be VGA, maybe plug in a monitor and see what comes up? I plugged a monitor into our NAM and it gives you an OS/2 desktop ... however yours must not be a...
  9. dgpcp

    Outpulse 10 digits on MICS?

    No problem stsguy -- I still appreciate the effort. :)
  10. dgpcp

    Outpulse 10 digits on MICS?

    Thanks, cook1082 for your advice. The reason for only wanting a small number of trunks is that this is a small office and we don't expect to be making/receiving a large number of simultaneous calls. Basically we're on a tight budget and trying to keep costs down. The provider can add more trunks...
  11. dgpcp

    Outpulse 10 digits on MICS?

    Re: only 3 channels We purposely are only getting 3 because that's all we need. The rest of the bandwidth will go toward the data side.
  12. dgpcp

    Outpulse 10 digits on MICS?

    Hello, We're going to be installing an MICS (6.1). We've ordered it with the following equipment: NT7B74, NTBB24, NTAB2769 Which is a T-1 card, a clock card, and the PRI keycode. We've ordered a T-1 from Speakeasy which they will be splitting for us (using a device called "Adtran TA 916") into...
  13. dgpcp

    Norstar - Default FAX on ATA to external line.

    > Just connect the POTS line directly to the fax. it *used* to be a dedicated line but we're killing that line to save $$ (we don't need to receive faxes, just send them). Anyway, that's an awesome, clever idea. I was using *82 as the external Hotline number (unblock caller id) but F78 (is...
  14. dgpcp

    Norstar - Default FAX on ATA to external line.

    I've got an MICS ... i think 6.1 software. I'm going to be putting a FAX machine on an ATA-2, and since it used to be on its own dedicated line, I'd really like to make it behave as though one already dialed "9" when it goes off-hook. Since it's not useful for us to try to fax to an internal...
  15. dgpcp

    Enforce password security on NVM 4? (NAM)

    Thanks curlycord! Guess i'll just have to browbeat or shame them into compliance with the policy! ;)

Part and Inventory Search

Back
Top